hard cut limiter

[markey b]

got an armtec limiter on the 5, but want something with just a hard cut...

anyone know of any without delving into the realms of EFI and ecu's etc.

[Os8472]

Come on admit it, u want EFI :)

[Adey aka Ewok]

Come on admit it, u want EFI :)

yeah looks really worth while the way your cars coming along lol.

try looking for the Bee R Rev limiter, mainly for efi cars but im sure you can make it work on a carbed motor, be warned that they are very hard cut and cause alot of sr20 rocker assemblies to smash apart

[Adey aka Ewok]

http://uk.youtube.com/watch?v=zBVUnjXiiCY

http://uk.youtube.com/watch?v=O6kb3aZRBqY

[Scoff]

New poster! (less than 10 posts)


http://uk.youtube.com/watch?v=zBVUnjXiiCY

http://uk.youtube.com/watch?v=O6kb3aZRBqY

that looks like my launch control :D

[Andrew Cooke]

yeah looks really worth while the way your cars coming along lol.

try looking for the Bee R Rev limiter, mainly for efi cars but im sure you can make it work on a carbed motor, be warned that they are very hard cut and cause alot of sr20 rocker assemblies to smash apart

a mate destroyed a Mountune Cossie race engine with a hard cut. The collets dropped out of an exhaust valve.

[car.crash]

is there any advantage between the armtech to the hard cut limiter ??

[jantheeven]

http://uk.youtube.com/watch?v=zBVUnjXiiCY

http://uk.youtube.com/watch?v=O6kb3aZRBqY

Okay... can anybody explain WHAT THE HELL HAPPENS IN THAT MOVIE?!? :eek:
It looks and sounds fantastic of course (boys will be boys :p), but that can't be good!

[markey b]

a mate destroyed a Mountune Cossie race engine with a hard cut. The collets dropped out of an exhaust valve.


i mentioned about ignition cut damaging collects in a previous thread, and was shunned for being silly!?!

[Sparkie]

the omex one has the hard and the soft cut option....

[jantheeven]

the omex one has the hard and the soft cut option....

please... enlighten me... I know jack **** about rev limiters... what's the difference between hard and soft cut and what's the best option for a carbed R5?

[Woznaldo]

Why would you want a hard cut over a soft cut?:confused:

[Trevhib]

Why would you want a hard cut over a soft cut?:confused:

Exactly. If there's a gain to be had (and I've haven't Googled to find out as yet), it can't be worth risking your engine. :crap:

[Adey aka Ewok]

for ****s and giggles and pops and bangs i guess

[Trevhib]

oh :dearme:

[Mart]

Why would you want a hard cut over a soft cut?:confused:

Why would you want any type of cut? :crap:

If you can't change gear at the right point, buy an automatic 'box...

[jantheeven]

Why would you want any type of cut? :crap:

If you can't change gear at the right point, buy an automatic 'box...

:laugh:

wise words... :mart:

[Andrew Cooke]

Why would you want any type of cut? :crap:

If you can't change gear at the right point, buy an automatic 'box...

That's me told :laugh:

[Andrew Cooke]

is now a good time to say my automatic micra is up for sale?

[Mart]

:sad2: :dearme:














:D

[Adey aka Ewok]

Why would you want any type of cut? :crap:

If you can't change gear at the right point, buy an automatic 'box...

never missed a gear mart? tho i think this thread was started as he wants it to pop and bang

[Adey aka Ewok]

is now a good time to say my automatic micra is up for sale?

sr20det it outa the gtir ;)

[The new Bill J]

Why would you want any type of cut? :crap:

If you can't change gear at the right point, buy an automatic 'box...

I remember once upon a time in Southend, a little Raider with white wheels hitting the rev limiter at every opportunity down the seafront. Maybe the driver's learnt to change gear since then ;)

[Andrew Cooke]

sr20det it outa the gtir ;)

you say that, but haven't driven it. It's unpredictable enough with the 1.2.:burnrubber:

[Mart]

never missed a gear mart? tho i think this thread was started as he wants it to pop and bang

Nope.

Oh :crap:

That'd be the same Markey Mark & the funky bunch who fecked his/a previous engine with over-use of a flamer kit then, no?

Pretty sure there-in lies an already good example of FAIL...

;)

[Andrew Cooke]

I remember once upon a time in Southend, a little Raider with white wheels hitting the rev limiter at every opportunity down the seafront. Maybe the driver's learnt to change gear since then ;)

Maybe, or maybe he just went out and bought a car with a soft cut limiter as standard:rolleyes:

[Mart]

I remember once upon a time in Southend, a little Raider with white wheels hitting the rev limiter at every opportunity down the seafront. Maybe the driver's learnt to change gear since then ;)

Really?

Must've been another raider with white wheels then, as I never had a rev-limiter fitted to that car.

Haven't you got a picket line to be standing by? :crap: :D

[Andrew Cooke]

Has Mart's FAIL boat just docked at the pie and mash shop?

[Mart]

Maybe, or maybe he just went out and bought a car with a soft cut limiter as standard:rolleyes:

If it's fitted as standard, that doesn't mean it gets used ;) Anyway, as you well know, it's running after-market ecu anyway :p

Feck me, I didn't realise I had gate-crashed the Fast & Furious fan-boy club site...

:D

[The new Bill J]

Really?

Must've been another raider with white wheels then, as I never had a rev-limiter fitted to that car.
:crap: :D

Yes you did, mounted on the dash, i'm sure the mounting holes are still there. You tried selling it to me as well when you grew up and ripped it out :laugh:

[Mart]

Bill, before you fall even further down that FAIL-hole, give up now mate. I assure you there was never a rev limiter fitted to the raider...

[Andrew Cooke]

If it's fitted as standard, that doesn't mean it gets used ;) Anyway, as you well know, it's running after-market ecu anyway :p

Feck me, I didn't realise I had gate-crashed the Fast & Furious fan-boy club site...

:D

I was just wondering how my traction control and flat shift was going to work without some kind of cut:cool:

[Mart]

I was just wondering how my traction control and flat shift was going to work without some kind of cut:cool:

4wd ftw :laugh:

[Mart]

And that wouldn't be a hard-cut anyway, would it?

[The new Bill J]

I swear there was. I remember you and JP both doing it, it was back when I first met you. Then when I was following you over the Dartford crossing on the way home you hit the limiter and your exhaust did a Bunsen Burner impression, which well impressed my mate :scared:

[Mart]

I can hear the failboat horns Billy...

[The new Bill J]

I can hear the failboat horns Billy...

:laugh:

Could this be another classic "Dilley Blackout". A bit like the wizard question about no dv damaging the turbo, that mysteriously disappeared :p :laugh:

[Ashy]

http://images.encyclopediadramatica.com/images/7/73/Roflcopter.gif

[Mart]

:laugh:

Could this be another classic "Dilley Blackout". A bit like the wizard question about no dv damaging the turbo, that mysteriously disappeared :p :laugh:

http://willvideoforfood.com/wp-content/uploads/2008/06/rabbit_pancake.jpg

[tiff_lee]

After reading this thread I still have no idea what hard/soft cut rev limiters do apart from buggering up your motor?

[MikeA]

Maybe its the boy racer in me from back in the day but I gotta say that looks/sounds cool.

And if I understand it right the Bee R Limiter is a two stage limiter so when the handbrake is on (or any added switch) the limiter comes in at a lower RPM. So you can set the first stage to optimum RPM to launch.

Never really read into this so Im going googling!

Can it work with a carbed engine?

Maybe Im still tired but how can it cause damage?

[Scoff]

oh no, rev limmiters are un cool now ? :sad: :D

I insisted on having one in my C1J after the linkage under the carb popped out and locked the throttle wide open one time, killing the bottom end at 9000rpm (it went off the 9000rpm tacho scale!!) as I dipped the clutch just after the finish line.

I used it a lot with flat shifting, without a clutch switch, just as a limiter. I didn't do this with the 16v engine in fear of shafting the gearbox, I'll be back on the limiter again next year ;)

[rs250nut]

On my old engine the valve head it self broke off and destroyed the engine could my armtech limiter had anything to do with this?

[Andrew Cooke]

On my old engine the valve head it self broke off and destroyed the engine could my armtech limiter had anything to do with this?

unlikely

[Mart]

oh no, rev limmiters are un cool now ? :sad: :D

I insisted on having one in my C1J after the linkage under the carb popped out and locked the throttle wide open one time, killing the bottom end at 9000rpm (it went off the 9000rpm tacho scale!!) as I dipped the clutch just after the finish line.

Could've been worse - The limiter bouncing away at 7k could've induced a cracked liner...maybe :worms: (<--- there's another smiley we need) :D

[Mart]

http://www.pets-warehouse.com/pic-s/SZMZM42.jpg

[Big Steve - Raider]

Could this be another classic "Dilley Blackout".

Dilley Blackout:[dil-eblak-out] - Noun

A) a period of total memory loss, as one induced by an accident or prolonged alcoholic drinking: The patient cannot account for the bizarre things he did during his blackout.

B) a moment when a KNOWN Fact about Mart The Failboat Captain Dilley is totally refuted by him but then proved to be totally owned at a later date.

Example: "I Don't own a Blue Jumper?!" "I Don't know what your on about?"

http://i306.photobucket.com/albums/nn259/BigSteveT/DSC00347.jpg

[Adey aka Ewok]

fpmsl

[Adam L]

:laugh:

[The new Bill J]

:laugh: @ Steve :agree:

[Trevhib]

That's clearly charcoal grey, not blue... :laugh:

[Mart]

:laugh: You fecking geezas :D

Don't give up ya day jobs! ;) :D

[Sparkie]

:laugh::agree:

[millie]

Don't give up ya day jobs! ;) :D

Unfortunately for you Mart, Photoshop IS my dayjob :laugh: :wasntme:

http://i306.photobucket.com/albums/nn259/BigSteveT/MARTFAIL.jpg

[dangerous dave]

:laugh::agree:

[Mart]

Millie! :dearme: :D :laugh: