HELP!!

[REBEL GT TURBO]

Been working on the car this morning and disaster struck! I was refitting the radiator when it snagged on a small bolt and went into the top core!! Now I have sprung a damn leak! I'm going to EFI rolling road day next Sunday with the car! Or should I say I was... Has anyone got a spare going?? It's got a separate oil cooler and my fan is fine just need a rad ASAP!! Can anyone help?

Thanks.

[Haz]

i have a spare. removed from a car a while ago. its tatty but worked at the time, not sure what its like now as they can rust internally when been off a while. your welcome to it foc if you want to collect and give it a try? shall dig it out and give it a once over before you come if your interested.

[Haz]

or you can temp repair them, drain the fliud, use a hot air gun to make sure its bone dry. push back the fins in the surrounding area and clean up the puncture and smear some areldite or similar product. i've even used fibreglass filler with sucess in the past.

[REBEL GT TURBO]

Ok thanks haz! I'll either repair it or Pete@backyard has one! Cheers.

[groky]

if that fails k-seal will fix it until you drain the water out again. blue bottle orange label good gear around 10 quid from any motorist discount store.

[Chris Holt]

I have a double capacity rad that came out of my five that I'm breaking. In London

[REBEL GT TURBO]

I have a double capacity rad that came out of my five that I'm breaking. In London

How much do you want for that mate?

[Brigsy]

Quicksteel or plumbers mate will temp repair it if ness.

[Chris Holt]

I've pm`d you let mw know and I'll take it to work to get it posted

[royz]

if your stuck got one here you can use