View Full Version : easyiest brakes to do
mightymanx
11-09-2012, 00:34
was fitting some bake pads to a vw polo estate before and they were probly the easyiest brakes pads ive ever done.
so has any 1 else ever done other cars that are easy ive done ford ka and connect etc before and of course renault 5 gt turbo and peugeot 205 gti but vw polo is the easyiest ive seen o i did a rover 220 a while ago that was also easy
Nottswoody
11-09-2012, 07:16
was fitting some bake pads to a vw polo estate before and they were probly the easyiest brakes pads ive ever done.
so has any 1 else ever done other cars that are easy ive done ford ka and connect etc before and of course renault 5 gt turbo and peugeot 205 gti but vw polo is the easyiest ive seen o i did a rover 220 a while ago that was also easy
My Raleigh carbon bikes brakes were easy :D
BILLY-R5GTT
11-09-2012, 07:50
Are the VW one's them you just undo one bolt and swing the caliper up the way and the pads are left on the disc? I think i've done a set of them or something similar well easy :agree:
My 19 16v cabriolet front pads are easy too :)
Evo brakes are very easy to replace. You don't even have to touch (as in unbolt) the calipers.
Id say all pads are easy to change unless the caliper is seized. French cars are alway easy. Rear shoes are harder to fit imo.
scratcher
11-09-2012, 10:37
Evo brakes are very easy to replace. You don't even have to touch (as in unbolt) the calipers.
Fact.
Slide a pin out, pull pads out and slot new ones in. Replace pin. Done.
SCHWARTZ
11-09-2012, 10:39
Ones you didn't have to take the wheel off to change, they would be nice and easy:D
markey b
11-09-2012, 15:37
hi specs are easy too.. two pins and pull pads out :)
mightymanx
11-09-2012, 18:39
Are the VW one's them you just undo one bolt and swing the caliper up the way and the pads are left on the disc? I think i've done a set of them or something similar well easy :agree:
My 19 16v cabriolet front pads are easy too :)
yer thats them well easy pads
Slammed 66
11-09-2012, 19:18
Easiest brakes to do?....
I manage to break everything quite easily :laugh:
Ross
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.