door hinge ..

[alex johnston]

im after a pair of early door hinges, the bits the weld to the body, i dont have enough meat on mine to drill out and fit a bigger pin, must be either new, or have zero play in them, any ideas, renault dont even list the early type:(

heres what mine look like

http://i782.photobucket.com/albums/yy103/alex_maris/hindge003.jpg

[Alastair]

There is loads of meat left there! Drill it out. Sleeve it. Insert new pin. :agree:

Someone on here was selling kits a while back with new bushes/sleeves.

[alex johnston]

There is loads of meat left there! Drill it out. Sleeve it. Insert new pin. :agree:

Someone on here was selling kits a while back with new bushes/sleeves.thats the good one, the top one is paper thin!

[Brigsy]

Im with alastair here, drill and shim. It will be fine

[Alastair]

thats the good one, the top one is paper thin!

cut one off a campus in a scrappy then mate.

[phase i 16 v turbo]

I can cut some off an old shell if still needed.

Thanks
Mike