My 5 with C1J Alpine head

[Yann5GTTAlpine]

New poster! (less than 10 posts)

Engine :


C1J 1397cc with Alpine Head
Renault Sport “RS265” camshaft
5 Alpine Turbo piston ( Malhe) machined for free axis mounting
FGS700 Cylinder
Connecting rods ringed , drilled and polished
Lightned flywheels ( -1,2kg) , balanced with crankshaft.
Custom T28 Turbo ( GT2560 compressor, T28 Nissan Pulsar GTI-R Turbine , 0.49 A/R turbine housing)
Fenix 1B EFI from R21 Turbo.
Custom intake manifold with 60mm single throttle bodie
Custom Stainless Steel exaust manifold
63mm GrA and downpipe Exaust line
Water to Air intercooler

Chassis :

Front :


Gazshock Coilovers suspensions
Clio williams transmission shaft
Megane F7R wishbone with Red Polybush suspension.
Clio RS1 Hub Carrier ( rocket).
23mm stabilized bar on hard aluminium support.
Megane RS F4RT Brembo 4 piston caliper
280*24 brake disc ( Renault Sport Clio RS )
Federal 595 RSR tyres 195/50/15


Rear:

Clio 16V rear-wheel axle unit
Gazshock Coilovers susensions
Federal 595RSR tyres 195/50/15
OMP 6 point cage

[Yann5GTTAlpine]

New poster! (less than 10 posts)

http://img693.imageshack.us/img693/3504/brideadm.jpg
http://img163.imageshack.us/img163/7393/paltiners.jpg
http://img137.imageshack.us/img137/1851/sdc11209.jpg
http://img688.imageshack.us/img688/4605/sdc11210.jpg
http://img13.imageshack.us/img13/5458/sdc11217q.jpg
http://img35.imageshack.us/img35/3582/sdc11221.jpg
http://img338.imageshack.us/img338/8081/sdc11652s.jpg
http://img521.imageshack.us/img521/6614/sdc11656.jpg
http://img221.imageshack.us/img221/1691/sdc11868.jpg
http://img248.imageshack.us/img248/2802/sdc12197.jpg
http://img403.imageshack.us/img403/1792/sdc12208t.jpg


http://img15.hostingpics.net/pics/415102SDC14123.jpg
http://img15.hostingpics.net/pics/562828SDC14125.jpg
http://img294.imageshack.us/img294/9990/p2705101102.jpg
http://img405.imageshack.us/img405/2471/p270510110201.jpg
http://img96.imageshack.us/img96/4351/pict0057y.jpg
http://img192.imageshack.us/img192/3060/sdc11737e.jpg
http://img443.imageshack.us/img443/5991/sdc11738o.jpg

[Yann5GTTAlpine]

New poster! (less than 10 posts)

http://img824.imageshack.us/img824/4549/sdc11870z.jpg
http://img339.imageshack.us/img339/1760/sdc11873f.jpg
http://img10.hostingpics.net/pics/733011SDC12902.jpg
http://img10.hostingpics.net/pics/539676SDC12901.jpg
http://img831.imageshack.us/img831/9533/sdc11649a.jpg
http://img256.imageshack.us/img256/7152/pict0104kw.jpg
http://img806.imageshack.us/img806/7483/pict0105o.jpg
http://img202.imageshack.us/img202/9186/sdc11611j.jpg
http://img80.imageshack.us/img80/2245/sdc11732r.jpg
http://img526.imageshack.us/img526/2528/sdc11844n.jpg
http://img560.imageshack.us/img560/5800/sdc11846.jpg
http://img695.imageshack.us/img695/9197/sdc11853n.jpg
http://img11.hostingpics.net/pics/64684002082012017.jpg

http://img11.hostingpics.net/pics/417036SDC10202.jpg
http://img11.hostingpics.net/pics/547546SDC10197.jpg

[Matt@CodeRedMotorsports]

I like this a lot!:smokin:

[Slammed 66]

This looks quite epic!!! :agree:

Ross

[Tutuur]

excellent work! looks like a real proper job!
love the idea of the clio sport plenum too!

did you make the adaptors for the 225 calipers yourself?

[Karlos]

Fantastic :)

[Yann5GTTAlpine]

New poster! (less than 10 posts)

Thank you,

Yes I realize all the parts it myself, sometimes I subtracted the machining due to time but are doing all the drawings by me

[Logg]

Wow the thought and engeening that you've put into your car is amazing. :agree:

The Renault sport inlet is a very nice touch as is the spacer plate to solve the water pump issue when using the alpine head. :cool:

Excellent work my friend I look forward to seeing your future updates.

[Tutuur]

do you mind sharing the drawings? :ashamed:

[Danny]

bad ass!!

[markey b]

awesome!!

[REBEL GT TURBO]

Love it people put new fresh ideas into a five! That looks awesome!! More pic's please and welcome to the club!

[Tony Walker]

Fantastic build, love the videos on youtube too :)

[REBEL GT TURBO]

Fantastic build, love the videos on youtube too :)

What do the videos come under on YouTube tony??

[rs250nut]

Great project, will be watching this one.:agree:

[Tony Walker]

http://www.youtube.com/watch?v=RmnaMSZVOO4&feature=relmfu this i think :)

[Tony Walker]

Sorry my bad just watched that again... different build :(

[Os8472]

Dude that looks amazing, keep it up :agree:

[Yann5GTTAlpine]

New poster! (less than 10 posts)

Hi everybody .

A lot of works but this winter I've optimized my engine after have destroy my gearbox and my clutch ( too torque for him :D).
Juste before the dead of the cltuch , with 1,3bar boost :

http://img15.hostingpics.net/pics/682533avantcasseboite.jpg
About 250 HP and 34 mkg of torque:). But problem for have a regular boost ...

So the new evolution :

New camshaft : Maxi 5 Turbo :eek:
Hollows pushrods (home made in steel 25CD4)
Zicral cups Valves
New EFI : UMC megasquirt
http://i12.servimg.com/u/f12/15/45/97/94/sdc11210.jpg
http://img11.hostingpics.net/pics/76252403022013179.jpg
http://i71.servimg.com/u/f71/16/22/28/44/sdc11211.jpg
http://i71.servimg.com/u/f71/16/22/28/44/sdc11212.jpg
http://i71.servimg.com/u/f71/16/22/28/44/sdc11213.jpg
http://i71.servimg.com/u/f71/16/22/28/44/sdc11214.jpg
http://i71.servimg.com/u/f71/16/22/28/44/sdc11215.jpg
http://i71.servimg.com/u/f71/16/22/28/44/sdc11216.jpg
http://img15.hostingpics.net/pics/56734616032013220.jpg
http://img15.hostingpics.net/pics/728810SDC11305.jpg

http://i77.servimg.com/u/f77/15/45/97/94/usinag10.jpg
http://i77.servimg.com/u/f77/15/45/97/94/piston10.jpg
http://i77.servimg.com/u/f77/15/45/97/94/piston11.jpg
http://i77.servimg.com/u/f77/15/45/97/94/poid_c10.jpg
http://i77.servimg.com/u/f77/15/45/97/94/poid_c11.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/383144_571383296214395_780878298_n.jpg

if you want , can made hollows pushrods for GTTurbo :D

[Brigsy]

Awesome:agree:

[TNT ANDY]

OMFG:eek:

[Matt Cole]

Awesome. Proper job instead of the usual bought off the shelf stuff!

[Big Steve - Raider]

New poster! (less than 10 posts)if you want , can made hollows pushrods for GTTurbo :D

:) How much Yann?

[B18ftMOJO5]

Pure Class. Awesome project. Exceptional work.

[Tony Walker]

Fantastic work... keep us updated :agree:

[Yann5GTTAlpine]

New poster! (less than 10 posts)

hello guys

Sorry for my absence but I have a lot of work ...
Neanmoin I advanced on my engine, I finally mounted with the new box JC5 strengthened and he start at the beginning of June. Today I've done the first 20 kilometers!
There is much work to adjust the management Megasquirt but I set the AFR between 2000 and 3500 RPM and the engine not running mla, I can do the running.

http://img15.hostingpics.net/pics/416687SDC11550.jpg
http://i80.servimg.com/u/f80/15/45/97/94/sdc11610.jpg
http://img15.hostingpics.net/pics/411857SDC11649.jpg

Max valves lifting :

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/945334_590502650969126_60559276_n.jpg
Intake valves lifting at PMH:

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/936241_590502604302464_1792850798_n.jpg

timing of peak Intake cam:
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/936925_590502634302461_816135993_n.jpg

http://img15.hostingpics.net/pics/77764020130601120947.jpg

[Wallace]

Outstanding:worship::worship:

Such precision and attention to detail.

[GTphil]

Full of want!:eek: Fantastic work!:smokin:

[TNT ANDY]

I would give my right nut for this conversion.


Ubber cool :cool:

[w35ty]

Love it!:agree:

[Logg]

It just gets better and better well done excellent work. :agree:

Wish I had the time, space, knowledge and money to build one. :cry:

In my mind this ultimate engine to fit to the GTT :smokin: What Renault could of fitted at the time if cost and safety of joe public wasn't a issue.

[caymanr26]

this is amazing - fair play

What discs are they - 172/182 clio? and do they fit wihout any adjustment?

[HAndy]

awesome engine :smokin:

one of the best 1.4 pushrod engine builds, with probable big hp output:cooter:

watch this space:D

[safehands]

Looks tremendous well done

[sega]

supercinq fatal! :agree: