headgasket set urgent...

[alex johnston]

half decent headgasket set, were do you get them these days,? im in hockley essex, anyone got one, or know were to get one asap, cash waiting.. call 07914076504

[Nottswoody]

find your local GSF mate and you want the 1.9mm blue rimmed one not the red 1.6 standard one..

[Carlos]

Corteco Head Set Mellior They Are The Best One To Use
Yes Gsf Are The Cheapest Second Euro Car Parts
Carlos

[Bigfoot]

I can sort out normal ones for you easily, but can also get the Corteco head gasket from one of our suppliers, wasn't cheap though as it was something like £10 carriage additional because they dont really deal with that supplier.

[phase i 16 v turbo]

Keep OE and uprated on the shelf
:D

[Mart]

you want the 1.9mm blue rimmed one not the red 1.6 standard one

:disagree:

[James5]

:disagree:


As Mart implies nothing wrong with std gasket as long as fueling and cooling is setup correctly but then the same applies to both h.g types crap setup and H/G at least will will go whatever the case

[Mart]

Fitting the thicker gasket will naturally lower the c/r too(*), which, on an already low ish c/r engine, isn't a good thing.

* Unless you've skimmed the head to compensate for that of course.

[Brigsy]

The question here is can you actually buy standard gaskets anymore? Id rather fit a mellior or payen than some of the cheap crap out there.

[Bigfoot]

I got an ultraparts head gasket on its own sitting here in my works draw, also some valve stem seals, should really empty my work draws every now and then :crap:

[alex johnston]

thanks for the replys, ive sorted it now, went blue as the head had to be skimmed a fare bit as it was detted to pieces , not on my car thow :laugh: