PDA

View Full Version : Omex 600 and megane f7r



Jaff
08-07-2012, 12:04
Can anyone help me with wiring up an omex 600 with the f7r megane coil pack? I have 4 cables coming off the coil pack but only 3 cables coming from the omex to go there (ignition 1 ignition 2 and a switched live feed) so what one am I missing? Am I being stupid and it's supposed to be an earth lol?

Also the 2 sensors on the thermostat housing, 1 is the gauge the other is the ecu sensor. The ecu sensor is easy as its explained by omex how to wire up but how do I get the other one to work with the dials to get a working gauge?

Quite desperate for help with this now so a quick reply will be appreciated

Thanks

clee
08-07-2012, 12:12
Suspect the other will be tacho signal

Jaff
08-07-2012, 12:13
Good shout, will double check the loom drawings for that.

Os8472
08-07-2012, 12:25
Is this in an R5?

Jaff
08-07-2012, 12:25
No, in a megane

Os8472
08-07-2012, 12:48
Does the car not have a factory gauge in it? Just use the OE wiring

Jaff
08-07-2012, 12:51
Yes it has an OE gauge on the dash clocks.

Not an option to go back to the standard wiring loom so I need a solution to do it this way

Os8472
08-07-2012, 13:21
How come u can't use the OE wiring?

markey b
08-07-2012, 13:24
How come u can't use the OE wiring?

id guess that its an older megane, not a 225

Jaff
08-07-2012, 13:34
Yes it's a mk1 megane, project thread on here if you need all the details, will take you forever to read through it tho.

markey b
08-07-2012, 13:45
Yes it's a mk1 megane, project thread on here if you need all the details, will take you forever to read through it tho.

so many pics my laptop gave up and red x'd half the pics after trying to load them lol

Jaff
08-07-2012, 13:48
Lol my bad, in my defence there's a silly amount of posts per page on here compared to other forums so rather than spread them all over a few pages you get them all in one go on here.

Os8472
08-07-2012, 13:48
Mk1 megane wiring diagram, item 'V' is the temp gauge

http://img.photobucket.com/albums/0803/os8472/c7874ea0.jpg

Jaff
08-07-2012, 13:53
Is that a 2.0?

Any chance you have a phase 2 1.6 diagram like that too?

Os8472
08-07-2012, 16:32
Is that a 2.0?

Any chance you have a phase 2 1.6 diagram like that too?

That is the 1.6 diagram

Jaff
08-07-2012, 20:36
Where is that from?

Looks like there's a 12v feed on the clocks and is earthed through the sensor in that picture

Os8472
08-07-2012, 20:41
It's part of an old data sheet I got from Renault over a year ago when I was looking engine swaps for mine

Jaff
08-07-2012, 22:10
Is it for a k4m (1.6 16v) phase 2 megane?

If so is there any chance you can send me a copy please?

Os8472
08-07-2012, 23:19
Yep it's a k4m job but that was the only bit I have as I was only looking at dash wiring with regards to the speedo, it was feck all help :(

Jaff
09-07-2012, 00:45
How did you get hold of it? Everywhere I've asked have been no good.

Really need a solution to this coolant gauge now as I'm beginning to lose hope :(