best adhesive for body panels?

[SirSamuelOfBuca]

Which is best just wanna do arches as they are peeling a bit.

[adscan]

Which is best just wanna do arches as they are peeling a bit.

tiger seal is pretty good.

[SirSamuelOfBuca]

Cheers!

[V Man]

tiger seal is pretty good.

Aye. Tiger seal and Sikaflex are good but.......... make sure they are not needed to come off again any time soon as once its on it isnt going come off again very.easily. Some decent silicone should hold it on and be easier to remove if you have to? Just something to think about if you need access.for welding etc in future:)

[SirSamuelOfBuca]

Ty for tip!

[djinuk]

id personally remove the arches and replace the studs, glues some in etc.. keep them mechanically fixed.

[Markey Mark (BD)]

id personally remove the arches and replace the studs, glues some in etc.. keep them mechanically fixed.

:agree: Repair the mounting bolts and fix them on as they should be, i wouldn't be sealing/sticking the archs on

[bod 182]

B and Q sticks like **** adhesive and gaffer tape:laugh::laugh::laugh:

[Phoenix Autosport]

tigerseal is just a polyurethane adhesive sealant, its good stuff but costs over £10 and you can get exactly the same thing from most motorfactors and caravan suppliers or boat builders unbranded for about £4, another trade name to look for is "carbond" and there are also ones available from "wurth" and as mentioned "sikaflex" :agree: