Fuel pump voltage

[5 turbo]

How do i check it at the pump.. and what should it be on a Phase 2?

Silly i know but think ive found an issue an wanna be sure voltage is good.

Cheers all :agree:

[Markey Mark (BD)]

Should be 12v+ at the pump mate

[5 turbo]

Should be 12v+ at the pump mate

Mark you are literally saving me here :agree::agree::agree::agree:

So 12v+ at idle? And measured by putting volt metre across terminals on the pump?

(oh and there a pm for you) :laugh:

[Markey Mark (BD)]

Mark you are literally saving me here :agree::agree::agree::agree:

So 12v+ at idle? And measured by putting volt metre across terminals on the pump?

(oh and there a pm for you) :laugh:

Thats right mate, with engine running should see 12v+.

Put earth lead of multimeter to bat neg/earth on chassis and pos lead on the 12v wire to pump

[5 turbo]

Thats right mate, with engine running should see 12v+.

Put earth lead of multimeter to bat neg/earth on chassis and pos lead on the 12v wire to pump


Right im under her,,Ive put metre live to pump live and metre neg to pump neg...

Sound cool? :confused: :ashamed::ashamed::ashamed::ashamed:

[Markey Mark (BD)]

Right im under her,,Ive put metre live to pump live and metre neg to pump neg...

Sound cool? :confused: :ashamed::ashamed::ashamed::ashamed:

Yeah that should work, sometimes its better to earth to chassis but it'll be ok

[5 turbo]

Yeah that should work, sometimes its better to earth to chassis but it'll be ok

:agree::agree:

right ive got 13.20v @ fuel pump :)