any pics of pipe setup around inlet manifold..

[jamie_clioGTT]

anybody got any pics of the back of there engine around the carb area piped up, im sure mines wrong...

or anywhere with sketches of how it should be done? have had a look but cant find anything..

[chris]

What pipes do you think are wrong mate

[jamie_clioGTT]

i hear alot of talk about one way valves fitted etc and holes blocked off for the breather pipes... i have no one way valves or blocked off holes or breather pipes LOL..

cant be to wrong ive used it as a daily for nearly a year haha

[chris]

Take a picture of the back of the manifold lets have a look if there is no one way valves then one pipe comes off the servo to the inlet to give you vacume for the brakes well it does on the renault 5 gt turbo

[jamie_clioGTT]

yer ive got that pipe but no one way valve. there is pics in my project thread in here under clio gtt to be. have a swift look and see what you think dude.

[jamie_clioGTT]

only took me two days but..

http://www.rtoc.org/boards/showthread.php?t=538

very helpful if any other members need help! sorry about the now pointless thread.. :scared:

[chris]

I cant see propley need a better pic of back of manifold that pipe from servo must be on one way valve or you would have a really hard brake pedal and crap feeling brakes cos you would have no vacume

[jamie_clioGTT]

brakes are neck breaking and feel good lol..hasnt caused me any problems this year :agree: maybe i should just ignore it :laugh::laugh:

[chris]

Lol you know the hosetail you push the pipe on thats the one way valve buddy i just looked again

[jamie_clioGTT]

now that explains that. top man :agree: