quick question on turbo's

[jamie_clioGTT]

Is it ok for the compressor housing to rotate abit? Any way of tightening it or is it just circlipped? Could this cause me any problems? Cheers boyo's

[Os8472]

It shouldn't move about normally, are you loosing boost pressure?

[jamie_clioGTT]

Ive only just put it on today. Its a t25/t2 and ive come from a t2. I run my t2 at 16 psi and this is set to 16 psi and it boosts and pulls you back but I swear my t2 pulled harder..

[Os8472]

Sounds like your loosing boost, is the circlip damaged?

[jamie_clioGTT]

No it all looks as it should mate. Is it just the circlip holding it into place?

[Os8472]

Depends on the turbo, get a pic up so we can take a look

[jamie_clioGTT]

Ok so its not the compressor moving. It's the whole thing that spins inside exhaust housing and it is just 1 circlip. Its not like the t2 where it has the two half moon brackets on that bolt up. has no holes on the exh housing for bolts. Unsure on what I can do now...

[chris]

Alrite mate take the turbo off straight away dont risk damageing it more have you got a turbo specialist by you i can ring to get it looked at i am sorry bout this