temp gauge not working..

[gardner51]

Hi all. Just been out for a drive in the r5. The gauge was working all fine then I booted it looked down and it now reeding nothing. When I turn the ignition on I can see it move up a little but it dosnt go up to were it should be?

Any known problems or could it just be a temp sensor?

Ellz

[Bigfoot]

Check the two wires which go to the sensor in the water pump, they might have come loose, or might need cleaning on the connectors.

[gardner51]

Cheers buddy, one had decided to brake off, so reconnected it and all good, no doubt they'll play up again soon,

Cheers Ellz

[gttjames]

told ya ;)