Silicone hose - turbo to intercooler

[SirSamuelOfBuca]

When I fitted my gt28 the standard hose did not fit. I bodged a hose to fit but with a kink in. This does not seem to affect the car at all even at full boost.

Ideally I want to get a hose that fits correctly but how do I go about this? Its got an extended part from the turbo at a funny angle, so a standard one has no chance of fitting :(.

Cheers

[Brigsy]

Get some pics up mate, by the sounds of it you will need to use silicone bends and hose jointers as necessary

[SCHWARTZ]

If the outlet adaptor has 3 bolts the 200sx straight adaptors may fit. Like brigsy says get some pix up:D

[SirSamuelOfBuca]

Ye it is a 3 screw one

http://img820.imageshack.us/img820/9225/turbohose1.jpg (http://imageshack.us/photo/my-images/820/turbohose1.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img27.imageshack.us/img27/3109/turbohose3.jpg (http://imageshack.us/photo/my-images/27/turbohose3.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

;o) didnt think about the 200sx pipes :O good idea! :D

[Brigsy]

Just rotate the comp housing more and fit a different adaptor to the cover like this

www.ebay.co.uk/sch/i.html?_nkw=gt28+adaptor&_sacat=0&_odkw=200sx+adaptor&_osacat=0&_from=R40

[SirSamuelOfBuca]

N1 cheers

[SCHWARTZ]

Thats the ticket:D
Now get a front mount:cooter:

[SirSamuelOfBuca]

I got a cossie fmic but Im not to good at mechanics so need some1 to fit it!! Pace ic is good for high psi though (I think?) :-)