The 5s down due to knocking help!!

[Nottswoody]

Cheers Dave.. Oh I know now it's the t25 at fault the bearing has cal lapsed by the looks of it and your right I thought it shouldn't move at all aswell.. It's going back on warranty to BW turbos this week.. Things didn't seem right from the start with this turbo.. See what they do for me and I will report back.. As for the t2 I will just take it all to pirtec and get a pipe made

[Nottswoody]

So pirtec is shut today.. Lol after just waking up the guy...(should put opening times on the website) were else could I get a conector from I don't need a pipe making just the threaded adaptor.. Must be somewere? :scratch:

[Nottswoody]

So put a t2 back on today and it's running sweet again thanks to r5turboron for selling me his turbo.. Toplad :) quick one though.. The cup mod is it the pipe nearest the bonnet or the other? We have boost again only running 14 now I want this one to last a little longer..

[Markey Mark (BD)]

So put a t2 back on today and it's running sweet again thanks to r5turboron for selling me his turbo.. Toplad :) quick one though.. The cup mod is it the pipe nearest the bonnet or the other? We have boost again only running 14 now I want this one to last a little longer..

If you doing it normal 'cup-mod' way put it on port nearest the front of the car but it has been know to use just the rear port on its own before ;)

[Nottswoody]

Cheers mark the thing is I just put it on the back one of the actuator and it read 1.5 bar and went of the scale on my dash turbo gauge so I was thinking that must be wrong.. Or the guy before was a loon :eek:

[Markey Mark (BD)]

Cheers mark the thing is I just put it on the back one of the actuator and it read 1.5 bar and went of the scale on my dash turbo gauge so I was thinking that must be wrong.. Or the guy before was a loon :eek:

Yeah if you stick it to the back port it will run a fair bit of boost mate! :D

[R5MJH]

as mark says its the one nearest the front of the car mate, watch ya dont det again 1.5bar lol if carbs not setup correct

[Nottswoody]

I had forgot as the last one only had one port :) cheers guys Can't tell you how nice a bit of boost feels after cycling for two weeks :)

[R5MJH]

sorry forgot to ask heard anything on bluntys turbo we had one just before you mate, it seems ok at mo thanx mick

[Nottswoody]

Carbs now running in 12s on boost but I will have to change my main again it's a little rich on idle..

[Nottswoody]

Sending bluntys back tomorrow wanted to make sure it was that first I think the bearings call lapsed but will report back ASAP..

[R5MJH]

thanx sir ok boss good luck wiv this one

[R5TURBORON]

Glad your boosting again mate

[Nottswoody]

Ok update on the turbo.. It's fixed thanks to bluntys bud apparently the shaft was bent.. But whatever it's on it's way back just in time for ND :) again its been great service from BW turbos. Let's see how long it lasts this time as I plan on having my first track experience very soon..

[Markey Mark (BD)]

How did the shaft bend?

[BluntyR5GTT]

from what i gather something had gone through the turbo and knocked it out of balance

[Markey Mark (BD)]

from what i gather something had gone through the turbo and knocked it out of balance

Contaminated oil then? Or did it go through front?

[BluntyR5GTT]

drop paul a pm mark im not sure he want to discuss what could of been the cause on the boards

[Markey Mark (BD)]

drop paul a pm mark im not sure he want to discuss what could of been the cause on the boards

Thats cool mate, was just curious thats all ;)

[Nottswoody]

I don't mind saying on here apparently there was swarf found in there and the only thing I can gather is it came from the washer I found in piston for after the carb rebuild which lead to the head off skimmed and machined and to top it off the turbo being boolaxed.. But as I said to blunty the only positives are I can now strip the 5 with my eyes shut it may not be pritty it may not be the best but it works and it's quick enough for me.. Iv had a pritty hard start to owning a 5 again but were all good now thanks to a cracking few members Iv met off here and some great advice off great guys I hope to meet soon at blyton.. Track time next :)

[Brigsy]

Told you it was the turbo :cooter:

[Nottswoody]

Told you it was the turbo :cooter:

:worship: I know I know I was a newbie.. Expensive lesson learnt.. Never had this before and I just didn't want to believe it was that.. Note to self listen to the voice of experience.. :)

[Nottswoody]

Sh1ite!!! So finally got round to polishing the 5 and it seems it's been sun scorched with all the dam rain we have been having.. Is it a case of cracking the Tcut out? The auto Glyms not touching it.. Dam red fives lol

[Jonny5]

Sh1ite!!! So finally got round to polishing the 5 and it seems it's been sun scorched with all the dam rain we have been having.. Is it a case of cracking the Tcut out? The auto Glyms not touching it.. Dam red fives lol

Worth it once its done tho mate! Cant beat a polished up red car :agree:

[Nottswoody]

See you in ten hrs then lol rub a dub dub!!

[philr5t]

Before I had my 5 painted mate my car was very faded and I found the best thing to bring it back for a few week or so was murr or turtle wax mate

[Nottswoody]

Well Iv nearly done it once with Tcut but still not happy so it's round two I think. It's coming up well but since it's blyton soon I might aswell give it a good rubbing my neighbours think I'm barmy as its pissing down outside "why you washing your car nutter " I am in the garage thoe. The white wheels are getting on my t1ts aswell.. Still it's nice to be polishing it for once and not fixing it :)

[BluntyR5GTT]

dont use t cut fella there is much better stuff on the market nowadays, leave it with me and ill get you a list of a few decent polishes :)

[Nottswoody]

Lol cheers bud but it's all done :) two tcuts two auto Glyms and two coats of extra gloss polish... It was a Xmas gift off the mrs.. Came up well I think

[Nottswoody]

Lol cheers bud but it's all done :) two tcuts two auto Glyms and two coats of extra gloss polish... It was a Xmas gift off the mrs.. Came up well I think

http://i1170.photobucket.com/albums/r524/Walkingboots01/0e8b7227.jpg

edited for you pal, copy and paste the image link ;)

[philr5t]

Looks lovely mate well done :agree:

[Chunk]

You think you've had a hard start to 5 ownership, i've owned mine for 2 years and never had a proper drive in it. The day I bought mine it went bang

Started to get it sorted the last few months though so hopefully i'll be able to experience some C1J boost sometime....!

[Nottswoody]

Well that's me pissed off yet again.. Fitted the t25 on went for a drive and it now smokes on after run.. Very light oil smell I think it just wasn't ment to be for me I give up with the dam thing :cry: trackday at blyton IS OFF.. Gutted

[R5TURBORON]

Just fit the T2 job done

[Nottswoody]

What's the going rate for a fully rebuilt t25 tomcat with new -31 actuator but it smokes I paid £580 I know I'm not going to get that must only need a seal

[Jonny5]

Well that's me pissed off yet again.. Fitted the t25 on went for a drive and it now smokes on after run.. Very light oil smell I think it just wasn't ment to be for me I give up with the dam thing :cry: trackday at blyton IS OFF.. Gutted

Dont be a big girl :D fit the T2 back on and bring it anyway.

[Mart]

Just fit the T2 job done

:agree:

http://www.rtoc.org/boards/showthread.php?p=281666#post281666

[Nottswoody]

Oh I'm still coming just not on track ha to big girl :) I'm out of time I'm on 12hr shifts all week and at night the mrs says "it's me or the car" and the mrs smokes it better than the car..

[Nottswoody]

strange no smoke out the turbo this morning :) but now it seems i have a knocking could it be the wheelbearing if so how easy is it to fit? do i need a press or just **** them out?

[Tony Walker]

alot easier with a press, getting the inner race off the stub axle will be your most dificult part. easiest to take the hub off and get a local garage to swap it, take them two mins and you all day :D

[Tony Walker]

sometimes turbos need a bit of bedding in, my dads turbo on his hi lux used to smoke like a trooper so i took the inlet off and checked it for play there was quite a bit but i must of disturbed the seals because after wiggling it its never smoked since lol. and thats on 150,000 miles.

[Nottswoody]

so sorted the bearing so thats all good.. now the t25 is a little smokey on over run oil smoke that is. running 18psi boosts fine do you think it will be ok? or should i not boost it?

so iv been looking on midland turbos website to why my t25 could be smoking and it says " could be because i used gasget sealer on my oil drian gasket? why would that make it smoke? but i did use it so i guess it could be that? i took the filter off and its dry then i took the inter cooler pipe off and thats dry. so maybe it could be the oil drian backing up? anyone had the same? for £1.99 i think i will get another gasket and see what happens:scratch:

[Nottswoody]

Well Iv changed the oil drain gasket AGAIN and it still smokes.. Sod it the dam things staying like it till the weekends over and then it's off to midland turbo with to be reconditioned for the third time.. Not impressed. :devil: don't think I will do this trackday now.

[Brigsy]

Whack the t2 on for blyton, 1bar of boost job done

[Tony Walker]

i had 3 cylinders at mallory last year and still had a great time, You dont need the turbo to have fun on the bendy bits :D just dont brake :D

[Nottswoody]

Will see how much I can get done Friday it's going tO be a very late one As I'm baby sitting straight from work to the wench gets back..

[Nottswoody]

i had 3 cylinders at mallory last year and still had a great time, You dont need the turbo to have fun on the bendy bits :D just dont brake :D

It boosts fine bud it just smokes on overrun

[R5TURBORON]

Don't worry about it just take oil

[Coops]

take some oil and bring the T2 as well, if it gets worse on the track, we'll all muck in and help you swap the turbo over, its not a big job and you'll only loose and hour or so of track time if that sorting it :agree: :smokin:

[Alex]

I'm liking the RTOC spirit in this thread! :D

[R5TURBORON]

take some oil and bring the T2 as well, if it gets worse on the track, we'll all muck in and help you swap the turbo over, its not a big job and you'll only loose and hour or so of track time if that sorting it :agree: :smokin:


:cool:

[Coops]

when I said 'we' I meant Ron :p ;)

[Nottswoody]

take some oil and bring the T2 as well, if it gets worse on the track, we'll all muck in and help you swap the turbo over, its not a big job and you'll only loose and hour or so of track time if that sorting it :agree: :smokin:

Thanks guys

I will bring the t2 aswell just in case it will mean just water water journal changing off the t25 then were good to go again.. Well Iv been pasting it for a couple of days now and it just seems the same just smokes on over run so I guess I will have to make sure I just keep the turbo in :laugh: all day..

Changing the antiroll bar bushes today but Renault say they don't do the inner ones any more? Should surely just be the outer ones that knacker up anyway? I'm not changing them cos there knackerd I'm just fussy and want new :) hope the weather cools down for these 5s my fans in and out all day today.

[Nottswoody]

when I said 'we' I meant Ron :p ;)

Iv done it that much I can doit with my eyes shut bud but thanks arons always helping me I will let him burn his hands :laugh: