PDA

View Full Version : Carb/Lobster Elbow Piping


LiamR
18-04-2012, 20:38
I thought I would remember where it all goes....but the old grey matter is dying off fast!!!lol

So I have done a few pics and added numbers.

http://i1203.photobucket.com/albums/bb387/liamroadnight/rtoccarb1.jpg

http://i1203.photobucket.com/albums/bb387/liamroadnight/rtoccarb2.jpg

I have written the ones I think are correct below, but feel welcome to correct me if I am wrong :)

1 - Fuel overflow ( the mysterious pipe to nowhere)
2 - Actuator (front port)
3 - AEI vacumn hose
4 -
5 -
6 - Connected to 8 then fuel pressure regulator?
7 - Fuel Inlet
8 - Connected to 6 then fuel pressure regulator??

So fill in the blanks and are the others correct????:scratch:
michael tierney
18-04-2012, 21:01
ur ok with 6 and 8
5 tees int0 back of actuator and the exhaust
3 is the AEI
4 tees into 2 and fwd of actuator....check piping and manual
Mart
18-04-2012, 21:02
1 - Fuel overflow ( the mysterious pipe to nowhere)
2 - Actuator (front port)
3 - AEI vacumn hose
4 -
5 -
6 - Connected to 8 then fuel pressure regulator?
7 - Fuel Inlet
8 - Connected to 6 then fuel pressure regulator??


1) It's more so the pressure ref' point for the enrichment cct.
2) AKA Cup mod port (T'd to port 4 on O.E setup)
3) :agree:
4 & 5) O.E feed for the actuator. Boost comp' cct is also plumbed from the elbow (T'd) to port 5.
6) :agree:
7) :agree:
8) :agree:

O.E boost gauge also T's into 6 & 8.
LiamR
18-04-2012, 22:46
Thanks for both of your replies. :)

I'll have a go at plumbing it all back together tomorrow. Any probs and I'll be back lol.
DaveMayGTT
19-04-2012, 10:04
Worth adding to articles?
LYNCHSTAR
19-04-2012, 18:46
Carb Spring Is On Wrong
Ian S
19-04-2012, 18:58
Worth adding to articles?Yes, but a finished post one with everything in the right place.
LiamR
20-04-2012, 00:53
Enlighten me how the carb spring is on wrong please??

Once I have it all back together together, I'll knock up a finished pic and add a few words so that it can be an article :)
Alex
20-04-2012, 07:44
The spring should be the other way around. Can't imagine it'll make any difference though! :)
Bigfoot
20-04-2012, 08:26
The spring should be the other way around. Can't imagine it'll make any difference though! :)

Spring is the right way round, should go through the hole in the bracket different and also the other end is supposed to go round the circle bar on the side rather than through the hole