where to get a fmic pipe run made?

[gttjames]

Piped in my own pipe run a few years ago, but each side of the intercooler has about 5 joins. Want less. Was thinking 1 silicone join off carb top to a piece of alloy straight then bent 90 degree straight down towards lower subframe - this way i could loose 2 joins making the pipe run alot better.

Iv seen a few nice pipe runs turn up on ebay and members on here, where do you go for something like this? Mine wont be to over complicated

[Brigsy]

Could get a custom exhaust place to bend some stainless pipe for you?

[steer from the rear]

I take it the pipe works 2"? If your really stuck and abit handy nip to b&q get some drain pipe cut it into the sections you need doing and maybe I can sort a stainless tig'ed up pipe for you, i usually tack them on car but I've done pipe work in the past that's been labled and clocked for me so I can line up the sections to make a hard pipe :agree:

[gttjames]

yes 51mm/2inches

you got any pictures of what you can make up?

[steer from the rear]

I will get some pictures for you I can weld sections into any shape or bend you like, I know this is a section of my exhaust but you get the picture
http://i277.photobucket.com/albums/kk55/steer_from_the_rear1985/IMG_0514.jpg

[gttjames]

that looks good, iv seen other people use pipe runs in that style anyway so il have to get a pipe shaped 1st and let you know then as might have to be a option.