Need part number to show model car and version

[James5]

I am in need of some assitance I have a part number for a renault throttle body but need to know what car and model it is of 7700871215.

I was told it was a clio 172 phase 1 throttle body but I have checked my dialogys and there are 2 x part numbers for the cable throttle body and the one I have is neither.

The reason I am checking is that i have gone to fit it tonight only to find out that this throttle body does not align up with the bolt holes on my inlet plenum???:confused:

Engine is ready to drop into the car pending a cable throttle body?

The numbers I got of my dialogys
7700113285
8200053557

[James5]

Ashy cheers for the advice on the Cliosport site matey will do that.:)

[James5]

If moderator want to delete this post please do:):ashamed:

[Ashy]

ok :)

[Ashy]

James, as I just posted on cliosport

"Altough looking at that throttle body it looks like the meganne type? I'm sure the clio ones don't have the water cooled / heated section."

[Scoff]

if its of any interest james I use a volvo T5 throttle, it's 60mm, it only takes a re-drill and tap of the plenum to fit. 60mm might be a bit big for what you want though.

[paul b]

the first number you posted is not a valid part number, possibly just the casting part number of the housing......

no more i can tell you on that part , sorry

[James5]

if its of any interest james I use a volvo T5 throttle, it's 60mm, it only takes a re-drill and tap of the plenum to fit. 60mm might be a bit big for what you want though.


Cheers Chris there are a couple of Volvo T5's down my local scrappy which I can rape for bits.