View Full Version : wag1
i bought a paddle clutch of the feller for 200 plus 20 postage claming its done 2500 miles but when receved it was f***ed :crap: so just watch out :agree:
i bought a paddle clutch of the feller for 200 plus 20 postage claming its done 2500 miles but when receved it was f***ed :crap: so just watch out :agree:
Warren sorry to hear that matey, has he sorted you a refund or anything?? wasn't he selling all the clio williams turbo parts recently??
hya mate na not got in touch with him and yeah was sellin all them turbo parts a while back, thought id be able trust alot of the people on here but :crap:
think i will just stick to the people i no have been on the site for years and can trust in future ;)
hya mate na not got in touch with him and yeah was sellin all them turbo parts a while back, thought id be able trust alot of the people on here but :crap:
think i will just stick to the people i no have been on the site for years and can trust in future ;)
Deffo worth sticking with long time or localish member for collection's. I was tempted with buying his engine but the price he was after I could have built one up myself with new parts for not far of the price he was after.
Drop him a pm matey I know he is a longtime member on the clio16valver forum, I can drop him a pm for you later if you wish and get him to come on here and respond to you. You got any pic's of the clutch?
ok well iv just dropped all me engine bits and pieces of at me local garage were me car is but its gettin towed to scoffs place 2morrow so i would have to go up there to take pics over the weekend or summet if i could get it rebuilt or summet wouldnt be that bothered but i duno if u can rebuild a clutch :confused:
ok well iv just dropped all me engine bits and pieces of at me local garage were me car is but its gettin towed to scoffs place 2morrow so i would have to go up there to take pics over the weekend or summet if i could get it rebuilt or summet wouldnt be that bothered but i duno if u can rebuild a clutch :confused:
I have message him on the cliowilliams forum asking him to logon here and contact yourself.
Sounds like you are making good progress so the project is in the final stages then. What clutch you going to be using?
yeah finally coming along hahah erm dont have a clue now probably have to buy another paddle clutch were is the best place to get one from new ?
Sorry to hear about this?
I cannot understand how a clutch that has genuinely done 2500 miles and was absolutely 100% fine when removed from my engine is ****ed
Bit disappointing that you havnt even tried to PM me? Surely by slagging me off by saying I can't be trusted is a bit quick without any contact whatsoever?
I have indeed sold alot of things from my turbo conversion that DID only cover around 2400 miles judging by my Williams' speedo. Everything what bought brand new for the build including the clutch. I EVEN put the original receipt in the box for you reference.
I bought it from mardi gras motor sport for 440ish sterling.
Bit pathetic giving someone negative feedback with NO contact whatsoever. All my ebay customers are more than happy. Im not out to mug anybody off at all. I assure you I have better things to do to earn 200 poxy quid.
Yes I am a regular c16v member and again I have the entire clubs support with being a genuine seller/buyer.
Thanks to James5 to alerting me to this. Sorry to hear it but I have even had positive feed back from this club too.
Tony Walker
05-04-2012, 20:01
Clutches even new dont look like theres much meat on them. can be difficult to tell sometimes. especially if its been used and the dust has accumulated in rivets/grooves, end up looking like theres nothing left.
theres an easy way to tell, if its in the box it will state the reference thickness of the plates / paddles on the side. Just stick a vernier over it and see what it reads then you'll know how worn it is.
Saying that if its going to Scoff's tomorrow he'll know how good or bad it is!
I would NOT of advertised the clutch for £200 if I didnt think it was worth it. You could see how little wear there was on the 4 faces. In fact there was such little wear when I removed it I got depressed realising how bloody much the ****ing thing cost me too start with!
steer from the rear
05-04-2012, 21:20
Well if the clutch is in the same condition as them pistons you were selling and how you described them to me I don't hold much hope for the clutch
Well if the clutch is in the same condition as them pistons you were selling and how you described them to me I don't hold much hope for the clutch
Righteo,
I was 100% honest with the engine. It had detonated and I didnt realise whenfirst advertising the engine. My mistake.
i will put up pics and then u all decide if its buggered or not the rivvets are worn wich has made grooves ryt the way around the plate, iv took it to 2 garages and both said its fu**ed :crap:
Geta grip mate, compareit to abrand new plate and see the difference. You have obviously never seen a four paddle. There arehardly any meat on them anyway
i havnt seen a paddle clutgh before no but i no when ones nackard and iv been told by to garages i will but pics up then we will see :coffee:
Matt Cole
06-04-2012, 19:28
If its down lo the rivet's then generally its know as Feked!
theres the answer then :agree:
Its definitely ****ed if the rivets are worn!! Get some pics up
How can you justify what you are saying?
You didnt even bother to contact me before posting n here? Must make you some kind of fool really?
Surely by resolving it with me via PM/email rather than just going all arsehole on me and sticking a negative feedback thread up would have been the better option?
If you had PM'd me stating to me that you were unhappy with the item I had sent you I would have asked for photographic evidence, a second opinion by a reputable garage and then asked you to send the clutch back to me in return for a full refund, however you just come on here and slag me off.
So quite frankly, you can stuff a refund up your arse
Matt Cole
06-04-2012, 21:35
:coffee:
I have in the past bought many parts from Frank as he is a local member and a well known member of clio16valver forum for many years. I nor others on there have had any problems with him in the past and I think this is the 1st case that I have heard of. Frank is a genuine person and NOT out to do people for money as to be fair I've seen seen where he use to live and he doesn't need the money.
Tony Walker
06-04-2012, 22:28
rivets wearing cover :sad2:
rivets wearing cover :sad2:
I Agree:eek:
JP Racing
07-04-2012, 00:21
If its any help helix will replace the pads on a worn paddle clutch and check it over for you. I've had a 4 paddle and 6 paddle done by them and it was roughly around £100 each so it's cheaper than replacing with new. That is if the rest of it is ok.
im not arsed about a refund on 200 pound lol just dont want you sendin other people on the forum **** :smokin:
The 4 paddle plate I had done was very close to rivetsbeing flush with the paddle faces. Literally a mm or so. The pads were cera metallic so should take an age to wear. Put a photo of the plate on this thread and let the people who know paddle clutches decide. Would have thought it would have been obvious to the seller if the rivets had worn? Bit harsh to bag someone off without contacting them first.
TNT ANDY
10-04-2012, 20:33
Lets av a look:confused:
I'm sorry to say, although I know you were pissed off at the time of posting, you should have either contacted Frank via PM or sent both Frank & a mod a PM to try to sort it.
If it was me you had slated like that without contact I'd be pissed off as well TBH.
I'm not taking sides, just stating how I see it, you didn't even give the guy a chance to refund you or anything :disagree:
So, lets see the pics or if you are taking it to Chris, what has he said ?
yeah i no i was just annoyed about me whole project its just goin tits up at the minute then receved that so yeah i appolagise for not talking to sumone first :ashamed:
its at chriss at the min so when i am down there with the car will take pictures shud be this weekend he is just pricing a loom up for me so when i now how much he is chargeing me will be going down :)
been up scoffs today to collect my clutch so i can send it of to get rebuilt will but pics up ov the clutches condition tonyt
right iv got some picture sof this clutch not the best as me phone is a ****ty blackberry but here they are i went up scoff unit this morning to collect the clutch and sending it of to http://www.clutch-specialists.co.uk/ (http://www.clutch-specialists.co.uk/)
this week
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.