Ending in half hour

[Gttnutter]

This looks a cheap but good purchase

http://www.ebay.co.uk/itm/Renault-5-Gt-Turbo-Shortshift-Gearlever-alloy-Gearknob-/180852834576?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a1bab4110

[Romil Davda]

This looks a cheap but good purchase

http://www.ebay.co.uk/itm/Renault-5-Gt-Turbo-Shortshift-Gearlever-alloy-Gearknob-/180852834576?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a1bab4110

Is anybody bidding on this item?

I think we (RTOC peeps) might need some way of communicating on such things, so we dont outbid each other... Any thoughts? I admit, this goes against the whole auction idea but means we should get some cheap (cheaper) bits!

[Gttnutter]

I bought one for around £40 off ebay a few years back for the old clive 16v 5 and it worked quite well.

[Logg]

That's Brigsy's.

http://www.rtoc.org/boards/showthread.php?t=27160

[Sparkie]

sorry Brigsy, it looks like its a normal gearlever with the top cut off and a £5 knob bolted to the top of it....
where is Goher Hanafi? - wasnt his company 5 star performance?

[Brigsy]

It was a kit that i bought off goher many years ago, from memory the stick is 50mm shorter than standard. I fitted the kit by cutting down the original shifter and fitting a new plastic sleeve thats moulded to retain the lift up reverse, the gearknob is billet alloy:rolleyes:

Its got the same feel as fitting a b&m shifter on its own, obviously if you want very short throw you wont get it without changing the pin in the box..

[Sparkie]

all becomes clear, you should have said that on the listing. i'd have bet you'd had got more money. :)

a mate of mine cut the top down and then welded an inch long bolt into the bottom of the gear lever mech, under the car. - it became very notchy, but was literally like a small switch to get into gear.....