View Full Version : Side Sill Trim
Hi guys ,
I removed the side sill trim from the passanger side & cant figure out how to clip the bloody thing back on. The original clips are still attached to the car... However the trim seems to only have plastic notch ! Am i missing some additional clips or does it just clip on ?
Thanks in advamce
Gibbo
I am pretty certain what your describing sounds correct.
Dont you have to put the sideskirt up at an angle onto the clip and lower it down???:confused:
Mr Raider
16-02-2012, 12:12
Do you mean side skirt? or internal grey plastic sill trim mate, side skirt should have 'lugs' on the top which fit over the black metal clips which are rivetted on the sill itself, rivett holes on bottom of side skirt for where its rivetted to bottom of sill.
Internal trim has white splined fixings that slide into trim and push into inner sill.:)
Do you mean side skirt? or internal grey plastic sill trim mate, side skirt should have 'lugs' on the top which fit over the black metal clips which are rivetted on the sill itself, rivett holes on bottom of side skirt for where its rivetted to bottom of sill.
Internal trim has white splined fixings that slide into trim and push into inner sill.:)
Yer mate its the side skirt... Thanks for that just wasnt sure ... Will try that tonight :)
Junglist
17-02-2012, 07:54
worlds stupidest clip
phase i 16 v turbo
17-02-2012, 09:33
Hi Paul make surer the clip is the correct way up. Can look confusing and will sit both ways.
Hi Paul make surer the clip is the correct way up. Can look confusing and will sit both ways.
Whats the correct way up ? Clips facing upwards ?
Gibbo
Mr Raider
17-02-2012, 12:08
Yup sticking out bits to top to fit inside top of side skirt ;)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.