What make is my exhaust system?

[REGGY5GT]

I cant seem to find what make my current exhaust system is, if anyone can tell by the pic below, its 2.1/4" system diameter, and the tailpipe is similar to a jap slash cut, its pecked my head for quite a while and i need some closure, heres a very old pic below

thanks

http://i39.tinypic.com/icpn68.jpg

[turbo ted]

k-tec:smokin:

[J$£5GTT]

k-tec:smokin:

i was going to suggest that,im sure they did them.
:)

[REGGY5GT]

Arhh thank you chaps, its been on since i bought the gt back in 2009, going to be firing it off soon for a powerflow custom, tell me lads, would powerflow be able to make a 3" system to fit the gt nice or would it catch and bang on the axle also would it be too much of an overkill? remember though im running a b18ft which i plan to see 230-240 bhp in the future.:)

[SCHWARTZ]

2.5" exhausts struggle to get round the torsion bar, so 3" may be too tight. What about a sidey?:D

[5 turbo]

2.5" exhausts struggle to get round the torsion bar, so 3" may be too tight. What about a sidey?:D

:agree:

An leave the silencer out ;)

edit.. Lovely turb op :agree::agree:

[REGGY5GT]

2.5" exhausts struggle to get round the torsion bar, so 3" may be too tight. What about a sidey?:D


ive always been keen on a sidey but i dont want to be turned down at track days due to the db limit, also my 5 is quite low and id stand a high risk of crushing the sidey on speedbumps...

[turbo ted]

i have k-tec 2 1/2 inch on my car the past 3 years and its never hit the torsion bar or body its fits like glove.
running a f7p turbo conversion now the past year and the 2 1/2inch system is not restricting the flow.you want over 500hp for a 3inch system:smokin:

[BluntyR5GTT]

iv also just had a 2.5" system made up by longlife, certainly no problems with hitting torsion bar and as ted says fits like a glove

[BluntyR5GTT]

tim do not go for powerflow mate they are absolutel dog ****e, they dont do mandrel bends etc and quality is worse than oe imo.

get yourself to longlife or somewhere similar they are quality systems total night and day from powerflow

[Alex]

Yep, KTR the same as mine. Very good exhaust actually :agree: