Fishey
30-12-2011, 17:49
Had a go this afternoon at enlarging my standard turbo elbow after not having much luck at getting a second hand one:
http://i92.photobucket.com/albums/l4/fishey798/5GTT/IMAG0117.jpg
http://i92.photobucket.com/albums/l4/fishey798/5GTT/IMAG0118.jpg
http://i92.photobucket.com/albums/l4/fishey798/5GTT/IMAG0119.jpg
Used a die grinder and a burr followed by some 180 grit sandpaper, took less effort than i thought it would! Thought the metal would be a lot harder!
http://i92.photobucket.com/albums/l4/fishey798/5GTT/IMAG0117.jpg
http://i92.photobucket.com/albums/l4/fishey798/5GTT/IMAG0118.jpg
http://i92.photobucket.com/albums/l4/fishey798/5GTT/IMAG0119.jpg
Used a die grinder and a burr followed by some 180 grit sandpaper, took less effort than i thought it would! Thought the metal would be a lot harder!