What turbo?

[Cr23g]

New poster! (less than 10 posts)

Aryt guys just wondering what turbo would be suited for my needs. Not looking for big power just a bit more power over standard 5s. Just wondering about differances between the two i.e power differance, dies the engine needs set up differently for the t25? Advice would be great :)

[Markey Mark (BD)]

If your just after alittle more poke then i'd go for a T2/T25, keep back end same but enlarge the front so it flows little more air for the same boost this way turbos not so strained
Yes the carb will need rejetting accordingly to suit new boost pressure

[dangerous dave]

If your just after alittle more poke then i'd go for a T2/T25, keep back end same but enlarge the front so it flows little more air for the same boost this way turbos not so strained
Yes the carb will need rejetting accordingly to suit new boost pressure

:agree:a t2/25 at 18psi is perfect... :cool:

[BluntyR5GTT]

yes as the guys have said t25/t2.35 will be spot on for what you want, im currently having a t25/t2 built for another r5gtt owner but he is also having the t25 shaft/turbine machined into the .35 rear it should make for a good turbo

[Cr23g]

New poster! (less than 10 posts)

Cheers for that guys, sounds just what im after