PDA

View Full Version : Oil feed and filter


lee1707
09-12-2011, 22:31
Where is the best place to buy a new oil feed and inline filter for my new t25?
car.crash
09-12-2011, 22:34
Stay away from inline filters. I killed 2 brand new turbos because of them.
TrixNFlix
09-12-2011, 22:57
Stay away from inline filters. I killed 2 brand new turbos because of them.

How did you manage that then?
car.crash
09-12-2011, 23:05
They block up very easily as they are so small. I used to rate them highly but would never touch one again.
TrixNFlix
10-12-2011, 06:31
They block up very easily as they are so small. I used to rate them highly but would never touch one again.

Surely it's doing it's job? :scratch:
Was this after a rebuild?
Mine was full of swarf after a rebuild, cleaned it out and was alright after that. Maybe yours was too fine?
raider_gtt
10-12-2011, 10:45
They block up very easily as they are so small. I used to rate them highly but would never touch one again.

mine has been fine to BUT saying that there is always a first time
JRP
10-12-2011, 10:49
Errrgh i wouldnt bother, surely unless its some metalic item passing through the turbo things would be ok.. just my opinion, ive never run one and never had issues.
TrixNFlix
10-12-2011, 10:53
Errrgh i wouldnt bother, surely unless its some metalic item passing through the turbo things would be ok.. just my opinion, ive never run one and never had issues.

Metalic swarf normally occurs after an engine has been rebuilt.