View Full Version : Uprated front engine/gearbox mounts
I've had some mounts made up for me using the same Landy mounts scoff uses.
Anyone interested?
Gearbox side.
Markey Mark (BD)
04-12-2011, 21:06
I'm in for a set :agree:
TrixNFlix
04-12-2011, 21:30
Top work. I'm up for a set too. :):agree:
Look superb, count me in :)
phase i 16 v turbo
05-12-2011, 08:25
Excellent effort Andy, I will have a set.
good man, im down for a set.. any rough idea of costs yet ?
I've spoken to the fabricator and done some sums I think they'd cost £60 for one or £110 for a pair posted with V8 mounts included.
car.crash
05-12-2011, 15:33
Nice work. They will compliment scoffs rear one nicely.
Thundercat
06-12-2011, 07:56
Count me in for a set after Christmas, thanks
Top work. I'm up for a set too. :):agree:
You not need two sets? the loft will get the hump :D
car.crash
06-12-2011, 10:02
Replacement mounts for these are under a fiver so if you break one it's a cheap fix.
Do they come in red? :)
They might come in red since your special Ipswich. :cooter:
if possibly could we make scoffs and these the same colour, just so they all match :)
if possibly could we make scoffs and these the same colour, just so they all match :)
You'd have to let me know what colour yours is as I think Scoff's came in red or blue in the first batch. But can't see that being an issue. :)
They might come in red since your special Ipswich. :cooter:
I'm not from Ipswich!!!
Big Steve - Raider
06-12-2011, 13:48
I'm not from Ipswich!!!
Yeah right Ipswich, of course you're not. :laugh: :wasntme:
The ones from me will be red this time round :)
Yeah right Ipswich, of course you're not. :laugh: :wasntme:
I'm not, never have been never will be
The new Bill J
06-12-2011, 20:13
I'm not, never have been never will be
:laugh:
Calm down, Ipswich :D
:laugh:
Calm down, Ipswich :D
Oh for godsake :sad2:
The new Bill J
06-12-2011, 20:23
Oh for godsake :sad2:
I think it's hilarious. It's such a good nick name - Everyone knows who you are, it's an easy name to shout, it's unforgettable, loads of people call you it, yet you hate it so much :laugh:
Big Steve - Raider
06-12-2011, 20:27
I think it's hilarious. It's such a good nick name - Everyone knows who you are, it's an easy name to shout, it's unforgettable, loads of people call you it, yet you hate it so much :laugh:
:agree: :agree:
car.crash
06-12-2011, 20:41
Ipswich. That sounds like a prostitute killers name.
Look can we leave it plz, we've totally hijacked Logg's thread
Dave Reed
16-12-2011, 12:44
I'll have a set please..
how we looked for these, its a new year guys cumon ;)
Well hopefully the first few will be finished soon. These pretty much already have buyers. A big thanks must go to my local RTOC members for showing there support from the start. :agree:
If we can start an famous RTOC list so I have an idea of if a second batch is worth a go.
Dave Reed
01-01-2012, 14:31
I'll have a set please..
:scared::scared::scared:
Am I on the 1st batch? Or do I need to goon the 2nd one?
:scared::scared::scared:
Am I on the 1st batch? Or do I need to goon the 2nd one?
Basically everyone on this thread apart from
Markey Mark
Brigsy
phase i 16 v turbo
will be on the second run as these guys said they would want a set when I first started to try and find some to make them so get a option on the first ones.
I'd like close to ten people interested before getting a second run together.
From what I can tell the people that have said they are interested are.
1)TrixNFlix
2)djinuk
3)5279
4)Dave Reed
Dave Reed
01-01-2012, 15:30
Cool thanks for clearing that up logg.
I'll keep an eye on this thread and as soon as there is 10 (if that's how many you require) I'll send the funds :agree:
TrixNFlix
01-01-2012, 16:58
Yep, money is here waiting for when someone drops out or for the second run. :agree:
as above , cash ready and waiting
i'm in for a engine mount , the gearbox wont fit on mine:(
cash waiting ,pm me when second batch etc:cool:
I'd like both plz bud, in red if poss :)
1)TrixNFlix
2)djinuk
3)5279
4)Dave Reed
5)HAndy (engine side only)
6)Os8472
Just picked up the first batch of mounts. :)
Once all the lads have picked them up and I've fully paid up with the fabricator I'll get hem to start on the next lot. ;) hopefully that'll be in the next two weeks.
Alastair
07-01-2012, 22:34
I've just found that I ripped my scoff rear mount apart tonight, good job the landrover replacement part is cheap and replaceable! might have been when I did the clutch! Going to make a retaining clevis/clip for it when I rebuild. The welds and steel are all still perfect!
How long for batch 2? I might put my name down if they are going to be quick?
I'd not like to say but I suspect they'd be at least a month away at the very best.
Once I'm all squared up I'll ask him to crack on and with the next lot. I'll post on here and P.M. people that have shown intereste when that happens.
The mounts Ready to fit to my car.
Will bring them to the Ace cafe on Monday if anyone there wants to take a look at them.
p30esteves
11-01-2012, 14:04
Hi, put me on the list please(engine and gearbox) . Thanks
dave j gtt
12-01-2012, 10:37
:cool: nice work.
Thundercat
12-01-2012, 13:35
pm me when you want cash and i'll send it, thanks
car.crash
12-01-2012, 13:44
I fitted mine up last night. Perfect fit for a direct replacement on your originals.
whats the latest updates on the second batch:innocent::innocent:
I spoke to the fabricator yesterday he's going to get onto the laser cutters and stuff so I should know by the weekend what's going on.
Thanks for your patients lads.
2nd batch should be ready around the first of February. I'll send some PM's out tomorrow to you lads.
As for the colour I'll happily paint any mounts but be warned my skills go as far as a paint brush and some hammerite.
2nd batch should be ready around the first of February. I'll send some PM's out tomorrow to you lads.
As for the colour I'll happily paint any mounts but be warned my skills go as far as a paint brush and some hammerite.
good call:) red would be nice ;)
Dave Reed
25-01-2012, 17:02
Any news on these logg?
Just had mine powder coated today for free ;) can't wait to get them fitted at the weekend.
http://i319.photobucket.com/albums/mm453/Brigsygtt/9ae9b37a.jpg
http://i319.photobucket.com/albums/mm453/Brigsygtt/f21709f6.jpg
http://i319.photobucket.com/albums/mm453/Brigsygtt/469ba192.jpg
The flanges have not been cut yet so no sign of any mounts yet. Sorry lads I am ringing the fabricator daily so when I know anything you guys will.
They looks good with posh paint on them Jon.
Flanges are now with the fabricator hopefully he'll crack on with them soon. :sos:
I won't ask for any money till they're finished and in my hands as his they'll be done tomorrow can mean next week. :brickwall:
Flanges are now with the fabricator hopefully he'll crack on with them soon. :sos:
I won't ask for any money till they're finished and in my hands as his they'll be done tomorrow can mean next week. :brickwall:
sounds good:smokin:
dont worry to much about the time frame , what with the cold weather at the moment, most peeps are unlikley to be in a mad rush to get out there and get it on :laugh::laugh:
You guys will be doing better than me I'd been waiting for first set since September and my new downpipe and other bits I'm still waiting. The other two fabricators I tried to use where evern worse only seemed interested in easy work. :cry: Soon as that's ready I'm out and fitting everything no matter the weather. :)
But as soon as I know you guys will.
http://i3.photobucket.com/albums/y89/L0GGTT/7dad1015.jpg
Right I've got the first set of mounts sat here who's needing them first out of you lads on the list? Can post them out Tuesday next day delivery or collection from the Ace Cafe on Monday (French car night)
The fabricator has sprayed them in gray primer. So untouched my hammerite brush strokes. lol
so posted its £115.50 including the PayPal fees or £100 cash collected
Romil Davda
17-02-2012, 09:57
Mate, can you put me down for a set... Will give you cash on Monda :)
Mate, can you put me down for a set... Will give you cash on Monda :)
Hi mate no need for cash until I have the more mounts in my possession as these are so slow at getting made. :cry:
But on a brighter note I have my five back on the road with v8 mounts all round. There's no extra dash rattles or vibration. Bit of luck it will be at the Ace Monday if anyone wants to have a look. :D
cash ready and waiting adn teh sooner the better as i plan to get my engine in end of feb.. has that first set gone yet dude.. if not drop me a pm with paypal details and ill fire it over mate.
cash ready and waiting adn teh sooner the better as i plan to get my engine in end of feb.. has that first set gone yet dude.. if not drop me a pm with paypal details and ill fire it over mate.
First one is yours dude. PM on route.
Romil Davda
17-02-2012, 10:35
Hi mate no need for cash until I have the more mounts in my possession as these are so slow at getting made. :cry:
But on a brighter note I have my five back on the road with v8 mounts all round. There's no extra dash rattles or vibration. Bit of luck it will be at the Ace Monday if anyone wants to have a look. :D
:eek: I should have my new engine going in in the next couple of weeks! Dont suppose you got any ideas on timescales?
Would be good to see your R5 :laugh:
Not he's a bit hit and miss. :'(
But even with the engine I've swapped these inside an hour.
TrixNFlix
17-02-2012, 11:11
Ahh damn missed these ones. Moneys waiting here aswell dude, give me a pm next time you have a spare set, or can pay now and u send a set whenever you get them? Regards andy
Ahh damn missed these ones. Moneys waiting here aswell dude, give me a pm next time you have a spare set, or can pay now and u send a set whenever you get them? Regards andy
Well I'm over his workshop again tomorrow. So hopefully they'll be some more waiting for me.
Romil Davda
17-02-2012, 12:19
But on a brighter note I have my five back on the road with v8 mounts all round. There's no extra dash rattles or vibration. Bit of luck it will be at the Ace Monday if anyone wants to have a look. :D
Is there a meet on Monday at Aces cafe?
Still havent fitted mine, ive been slack as **** lately! Might do it this weekend
Still havent fitted mine, ive been slack as **** lately! Might do it this weekend
Don't you be neglecting those guns Brigsy. :laugh:
Is there a meet on Monday at Aces cafe?
Yeah Ace cafe has a French car night on the 3rd Monday of the month. Normally a good turn out of us RTOC guy at this.
Thundercat
17-02-2012, 19:24
Money ready and waiting, just pm me when there available, thanks
Mounts sent out today to the lads.
I've three more sets left.
SCHWARTZ
27-02-2012, 17:57
sorry sure this has been said countless times but how much for a set?:D
sorry sure this has been said countless times but how much for a set?:D
£100 collected or £110 posted
Just fitted these to mine and I gotta say, Logg top work fella the fit is near perfect, I say near perfect as the hole in the top of drivers side braket so u can access the nut on mount just needs moving over to the drivers side by 3 maybe 4mm just to let a socket to clear abit easier, other than that there perfect fella.
I was thinking I was going to have to fit a forth mount on mine to prevent engine movement but now combined with Scoff's rear mount it doesn't move at all:eek:
Great parts fella, well done:agree:
Dave Reed
29-02-2012, 00:13
Just fitted these to mine and I gotta say, Logg top work fella the fit is near perfect, I say near perfect as the hole in the top of drivers side braket so u can access the nut on mount just needs moving over to the drivers side by 3 maybe 4mm just to let a socket to clear abit easier, other than that there perfect fella.
I was thinking I was going to have to fit a forth mount on mine to prevent engine movement but now combined with Scoff's rear mount it doesn't move at all:eek:
Great parts fella, well done:agree:
I'll second this Logg, not fitted mine yet, but noticed I was going to have to open the hole up a little to aid tightening the nut..
Great bits of kit :agree:
Glad you got them safely fellas and thanks foor the feed back. :agree:
Yeah i did notice the engine side hole needed moving slightly after the first batch and asked for it to be moved but the man with the lazer cutting forgot. :cry: a socket is a very tight fit but does just fit on.
James_Surridge G1 5 GTT
03-03-2012, 21:54
Can I have some of these??
Steven Leece
08-03-2012, 22:18
Big thanks to Andy for sorting these mounts out!!
Got mine today and I'm very pleased with them!!
Just a shame I'm so far off actually getting them fitted!!
Steve
Fitted mine today. First impressions seem very good, there is a little bit of vibration at idle but that was to be expected.
I have only been for a short test run as the weather is bad. On acceleration i have noticed the back end squats straight away as the forces transfer through the car rather than the mounts first. Definitely get 10/10 from me, im off to the fast show at pod next week so ill test them to destruction :D
jesus in the seat of a 5
18-03-2012, 21:21
Can I have some of these??
me too log ole buddy....:)
With national day sneaking up on us all is there any more people that want some front engine mounts. Can get Paul to make a little batch for me to bring to the event.
£110 posted uk mainland
£100 collected
National day batch of mounts.
1) jesus in the seat of a 5
kentraider
02-07-2012, 22:58
hello buddy...i wont b at national day but can i have a set fella...looking at the feed back on them a great buy :agree:
National day batch of mounts.
1) jesus in the seat of a 5
2) Bigfoot
Sorry my little RTOC bud's but uncle Logg will not be bring any engine mounts to national day as only three is not enough to get a batch made and would of put the prices up to get made. Five would of been the minimum. :cry:
Will these still be made once you got 5 on your list?
Yep once I've five people I can have them made. :)
Just don't have £200 at the mo to have tied up in unsold pair of mounts. As I did that last time :sad2:
mike's r5
30-07-2012, 20:36
I have pm'd u but thought I would post here as well, Can u put me down for a set please. Thanks Mike
1) jesus in the seat of a 5
2) Bigfoot
3) Kentraider
4) mike's r5
Just one more person needed and I can give the fabricator the nod to start on them.
p30esteves
31-07-2012, 13:21
I am only interested in 1 mount (Engine side), if you can do only one you can put me on the list.
Tkanks
Pedro
New poster! (less than 10 posts)
Can put me down for a set Cheers
Thats what I like to hear with 5 on the list :D just need the go ahead so its good to go on my car :D
Ok everyone I'll get onto the fabricator and see when he can get these done.
Hi Pedro I'm not too sure about posting to Portugal as If I did It would have to be fully insured and tracked which I'd imagine would not be cheap.
Spoke to Paul the fabricator last night he say's the shop that does his laser cutting is shut for the next three weeks and then I'm away the end of August.
So at best it'll be early mid September now.
Sorry guys.
Spoke to Paul the fabricator last night he say's the shop that does his laser cutting is shut for the next three weeks and then I'm away the end of August.
So at best it'll be early mid September now.
Sorry guys.
:crap: will have to wait then
Due to the amount of time and trips to the fabricator it takes to get these made and the hefty sum of my own cash i have to put in upfront I won't be getting more made. Unless my car needs major fabrication work again so am doing the trip anyway.
Sorry guys
Turbo Ted has a full set for sale.
http://www.rtoc.org/boards/showthread.php?t=31043
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.