c1j wiring loom

[djinuk]

Ive never took off a wiring loom from a renault 5 before , however i purchased an engine which came with a loom.. Im amazed if they really are this simple.

Any help and advice.


First we have the main multiplug that sits behind passenger headlight correct.
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2376.jpg

where do these go
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2378.jpg

and these lot, i imagine some are alternator?
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2380.jpg

and this plug?
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2377.jpg

is this really a full wiring loom once the relays added?, just seems so damn small
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2375.jpg

[R5TURBORON]

second pic is the starter motor and thats the complete engine loom very simple

[djinuk]

theres a couple of pics in this one that dont really appear to go anywhere, Orange and yellow i think, just chopped
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2380.jpg

[Kris M]

The oval green shaped plug goes on the rad fan temp switch, the purple and yellow wires in the bundle at the end go to the spade connecters on the top of the alternater. The relay holder is for the rad fan relay, and the think black and red wires with ring terminals are the pos and neg on the alternater. Slightly further down youve got two orange and two brown, these are for the oil level and pressure switches. Doesnt look like theres any anti perc wireing in this particular loom either

[djinuk]

brill, all sounds good to me then, ill degrease the loom, tidy it up slightly and away ill go.

[jamie_clioGTT]

i was going to say green plug gearbox for reverse light?!...

[Ashy]

i was going to say green plug gearbox for reverse light?!...

:agree:

[djinuk]

the question that leaves is what goes to the fan switch ?

[jamie_clioGTT]

dont quote me on this as mine is all custom wired but dosent the fan switch wiring come off the relay that sits by the alternator? if so just trace them wires back..

[TNT Tricky Nicky]

theres a couple of pics in this one that dont really appear to go anywhere, Orange and yellow i think, just chopped
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2380.jpg

that relay connector should have your fan switch connectors coming from it, difficult to tell but i think it's that red wire which has tape on it is one of them as it been joined on to a brown wire by the looks of it.

the chopped wires are a switch feed from the perc fan sensor and a permanent live for the relay for the perc fan which has been removed so that will need capping off

[djinuk]

sweet, i will untape them wires, they may have been connected to give constant fan maybe ?

[TNT Tricky Nicky]

probably best to strip it back to the original loom, it looks more like they've just cut the orignal switch plug off and extended the wire for some reason.

from memory i think the other one should be the orange wire, so the brown and orange are your fan switch

[Ron]

The two wires taped together go to the fan. Standard plug was faulty. The orange wire goes to the temp switch along with the other spare wire. Just needs a relay.

Ron

[djinuk]

ledgend, cheers ron.. (top geeza)