dyno run for £30!! [Archive]

Scoff

09-11-2011, 19:38

"Initial testing has shown this dyno to give far more accurate standard power figures than our previous dyno dynamics dyno "

snap!

It's good to hear they like it. Dyno dynamics takes a lot of beating :)

My workshop at 4pm today

http://www.rtoc.org/files/Technical%20Files/Scoff/superflow.jpg

Markey Mark (BD)

09-11-2011, 19:44

I see you got a new toy there Scoff mate! ;)

Nice to see a trusty Hyster H2.50XM doing the work there! :laugh::laugh:
Sorry i know its geeky, i work on those things everyday! Out of curiosity it didn't come from Barloworld did it?

Ashy

09-11-2011, 19:56

Nice one Mr Scoff I had heard this was in the pipeline, might save a few licences whilst mapping :agree:

5teve L

09-11-2011, 20:35

Scoff

09-11-2011, 20:42

Nice to see a trusty Hyster H2.50XM doing the work there! :laugh::laugh:
Sorry i know its geeky, i work on those things everyday! Out of curiosity it didn't come from Barloworld did it?

Ha only a 2.0, gas, and fecking gutless ! It couldn't get up the 0.5" high curb with the dyno (1600kg) on the forks ! Came from a local company called CMS.

Logg

09-11-2011, 20:46

£30 not a bad price.

Well done Scoff I better get my bits finished so you can't check everything over on that wonderful new toy of yours.

Markey Mark (BD)

09-11-2011, 20:55

Ha only a 2.0, gas, and fecking gutless ! It couldn't get up the 0.5" high curb with the dyno (1600kg) on the forks ! Came from a local company called CMS.

Yeah they use the 2.0l mazda lump when once old and clogged up (especially the gas unit) there gutless as hell.
We are main dealer for those make so wondered if come from us! :laugh:

Sure will be making venture up next year for a go on those rollers once there all in ;)

Scoff

09-11-2011, 20:57

£30 not a bad price.

Well done Scoff I better get my bits finished so you can't check everything over on that wonderful new toy of yours.

I wish it was a toy ! (well it sort of is I guess).

But that sucker is the culmination of 3 years of hard work and saving and is a key component of the "chris wants an easy life" masterplan. It'll have been pocket change for k-tec but it was a big investment for me and so *needs* to make up a big part of my forseeable income. I've been waiting for 5 months for it (there's a waiting list!) and they're about as good as it gets in the world of cradle dyno's. :)

Scoff

09-11-2011, 21:02

Yeah they use the 2.0l mazda lump when once old and clogged up (especially the gas unit) there gutless as hell.
We are main dealer for those make so wondered if come from us! :laugh:

Sure will be making venture up next year for a go on those rollers once there all in ;)

Ah, well I all know is that it took full throttle and a 45° run-up to climb 0.5" :ashamed: Russell, steer from the rear kindly came down to do the actual unloading, lets just say he wasn't a fan :D

Re the dyno, no problem, goes without saying :)

Matt Cole

09-11-2011, 21:27

:agree: Ha not sure if you were keeping it a secret Scoff, but we all new up here in the north east!!!:D

Really chuffed for you squire, and you have our utmost support!:)

rs250nut

09-11-2011, 21:35

Fair play Mr Scoff look forward to tuning the civic:agree:

Logg

09-11-2011, 21:45

Well you now have one of the most useful tuning tools :) well done.

In a few weeks I'll give you a pm to see when I can book my car in. :cool:

DD seem good rollers only bad thing i've herd is people crying cause they think they under read. lol :ashamed:

TNT ANDY

09-11-2011, 22:33

Ahem!:smokin:

I'll be up for a spot of tuning ASAP:cool:

Scoff

09-11-2011, 22:48

:agree: Ha not sure if you were keeping it a secret Scoff, but we all new up here in the north east!!!:D

Really chuffed for you squire, and you have our utmost support!:)

Cheers matt :) No it was never really a secret, I just don't believe it's worth shouting about something until it's done or at least you're certain it's going to happen. There were too many occasions where it nearly didn't happen (because Superflow are hands down THE worst company I've ever had the displeasure of having to deal with - I fancy comparing notes with K-tec infact) so it was best to just wait and see what happened.

Scoff

09-11-2011, 22:51

Ahem!:smokin:

I'll be up for a spot of tuning ASAP:cool:

Poor Andy's been on the waiting list for a little while, he knows all about my troubles with "not so Super flow" !

djinuk

09-11-2011, 23:06

well done.. its always a big buzz in life when plans become to come together.

philr5t

10-11-2011, 01:02

Great news mate looking forward to bringing the car down soon for mapping

engine came out tonight so not long and I'll be up to you For some fun

GTphil

10-11-2011, 02:45

Ace! Well done mate, I see no reason why people won't be queuing down the road for your services, I'm sure you will do just fine;)

TNT ANDY

10-11-2011, 06:38

BTW - hope you've got a big hole to put that in, and are you installing it yourself? looks like a bit of a handfull.

clee

10-11-2011, 08:47

Excellent news :cool:

You got a good shovel ?

philg

10-11-2011, 10:10

Fantatsic news chris :)

Scoff

10-11-2011, 11:18

It should be going in the floor next week :)

clee

10-11-2011, 11:27

More importantly ,what free soup will you be offering :D

Duncan Grier

10-11-2011, 11:53

Obi One Scoff gets a set of rollers - FANTASTIC news :cool:

As per mails will get in line to set the track beast up on the rollers and look to bring some stuff your way in the future ;)

DG

Scoff

10-11-2011, 12:18

More importantly ,what free soup will you be offering :D

Hot quinoa and spinach, but it'll only be available to those who have completed, or at least show signs of completing their project cars ;)

clee

10-11-2011, 12:34

:ashamed:

Don't ask .........Engine version #7
You any good with MBE ;)

Scoff

10-11-2011, 13:01

:ashamed:

Don't ask .........Engine version #7
You any good with MBE ;)

Yes fine, is it going on MBE ?

gtmatt

10-11-2011, 13:12

great news chris , if you need a hand with anything let me know , can nip up and help out , glad you got it:)

clee

10-11-2011, 13:15

Yes fine, is it going on MBE ?

Under discussion but a long way off as yet so we'll have to see .Will talk to you when we actually have the car back together :agree: