Alternator belt

[danielmk323]

Hi guys i have a problem my alt belt keep truing up side down on the pules and some times it pops out when hard take off any tips

[phase i 16 v turbo]

Have you got the bracket on the water pump that helps keep in in place? One of these?

http://www.gt-turbo-spares.co.uk/cart/index.php?cmd=view_image&prod_id=378

Thanks
Mike

[danielmk323]

no i don t think so where should it be attach to any pic

[phase i 16 v turbo]

Here are there pictures I have.

[LiamR]

Mike is spot on.

I kept losing my belt years ago until i realised my bracket was missing. It does make a big difference.:)

[danielmk323]

Many tanks i dont have it on my new pump i see if i can find it now all the 5 have them or only the gtt one

[Tony Walker]

check all pulleys line up, the bracket helps but it shouldnt be doing this normally.
bushes on the alternator can cause it to move about. if youve fitted a new waterpump check the pulley is ok on it.

[Brigsy]

Once the belt has spun over you will need to change it for a new one, buy an o.e solid belt and check all the pulleys are inline & alternator bushes are ok.

[phase i 16 v turbo]

Many tanks i dont have it on my new pump i see if i can find it now all the 5 have them or only the gtt one

Only the late Phase 2 came with them.

[THE MASTER]

is the bottom/crank pulley fitted the correct way round. it is pos for it to go on backwards

there is a little -> stamped on the outside face

[danielmk323]

Once the belt has spun over you will need to change it for a new one, buy an o.e solid belt and check all the pulleys are inline & alternator bushes are ok.
the belt is new one but not o.e

[danielmk323]

is the bottom/crank pulley fitted the correct way round. it is pos for it to go on backwards

there is a little -> stamped on the outside face
Tanks for the tip