RMD Intercooler?

[Steevo]

I have the intercooler (below) that came with the car when i bought it, does anyone know if this is junk (i.e cheaply 'made in china' ebay tat) or worth using? It looks fairly solid, but i'm curious.............. Thanks :)

http://i1092.photobucket.com/albums/i404/MrCanonfire/P9050074.jpg

[Scoff]

bar and plate, it's probably half decent :)

[Steevo]

bar and plate, it's probably half decent :)

Thanks :) what sort of boost pressure should this be capable of running before i'd need to look at a front mount option?

[Adam 005]

Thanks :) what sort of boost pressure should this be capable of running before i'd need to look at a front mount option?

you should be able to run around 14psi with that.You may getaway with a standard carb on that boost but it would pay to have a fueling run on some rollers or get your self a wideband afr gauge to be sure of the fueling.:)

[Steevo]

Cheers Adam, it'll have to go eventually then if i want the kind of power i experienced sat in yours the other week :D I'm surprised though because my standard strapped ic took 1bar without issues. :(

[SCHWARTZ]

That will take loads of boost pressure but what I think what Adam means is that it will cool well enough for 14pair after thy you're prob better off with a front mount.

[Eugein Offord]

the Pace all alloy intercooler this one shadows, was good for 2 bar of pressure..

[SCHWARTZ]

I had a pace standard capacity ic and that cooled fine at 18pair saying that.

[r5_scotty]

iv had a rmd intercooler in my five for a while and its fine a 20psi. all good so far. :agree:

[Steevo]

iv had a rmd intercooler in my five for a while and its fine a 20psi. all good so far. :agree:


Thats useful to know, thanks:agree: