Jimmy_GTT
08-09-2011, 10:01
I'm searching for the size of the gauge pin to adjust the positive throttle opening when choke is in the very cold position.
It is nearly the same procedure as the accelerator pump adjustment with the 5mm drill bit.
I have also noticed that there are different levers with the number 18,21,24 on them. What does this number mean?
And I have found choke flaps with number 8 and number 10 also.
It is nearly the same procedure as the accelerator pump adjustment with the 5mm drill bit.
I have also noticed that there are different levers with the number 18,21,24 on them. What does this number mean?
And I have found choke flaps with number 8 and number 10 also.