breather systom pics

[daveturbo]

can anybody upload me a pic of the breather systom with catch tank fitted.

iv seen a couple where they have blanked the one way valve on manifold and got rid of a load of the pipes and fitted a catch tank.

just want to tidy the bay up abit

or just an list of things to do would be great.

cheers chaps

[Junglist]

might be one in my pics m8

[Junglist]

might be one in my pics m8

well there would have been if my pics were still there

[scratcher]

Bit of an old pic, but it shows a simples way to do it.

http://i59.photobucket.com/albums/g319/pimpscratcher/Renault/SDC13321-1.jpg

The red lined hoes goes from your rocker cover to swirl pot as standard. Then the one that would usually go to the T piece is re routed into the catch tank, marked green in the picture.
Remove all the rest of the breather hoses.
Plug the telephone hose with something a suitable size. I can't remember it now :crap:
And remove the one way valve from the back of the inlett manifold. Replace it with an M8x25 bolt, using the brass washer from the one way valve. Done :)

[raj]

i hope this helps -

Note: mine breather setup was minimal,
from the degas pot,
you can see i got rid off the degas pot it fitted an L piece in its place, from here the hose runs to a T piece on the rocker cover, then from the rocker cover to an oil catch tank with breather cap.

http://i99.photobucket.com/albums/l284/R5_GTT/r5%20gtt%20REBUILD%20-4/DSC04671.jpg

[daveturbo]

thanks chaps

[benj88]

http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03639.jpg

http://i544.photobucket.com/albums/hh343/B20ENJ-CODE/DSC03617.jpg