PDA

View Full Version : atom 245 honda data ecu problems



joegtir
31-08-2011, 11:30
hi there we got a atom 245 and last week it developed a problem and it wont run right also wont idle now , before it was running idling ok and across the battry the volts would drop from 14.2 to 13.6 , realys would click and then the revs would go back to normal just a very quick dip only 0.5 of a sec if that and it was ok , but as i said it wont idle and i think the problem is getting worse ,when i plugged it in it comes up with falt codes c1555 and c1500, i cant find anything for any of them , does anyone know what it might be ??or where i can take it near stoke or leicester ?? thanks

BluntyR5GTT
31-08-2011, 12:06
Leave this with me fella ill have a word with my mate later on to see if he can sort it for you

joegtir
31-08-2011, 12:08
if you can mate be a big help we really need it back on track for sat

Scoff
31-08-2011, 12:26
I don't know if this applies to your K100 or K-pro hondata but have you tried reading the cel code ? Ie, finding the blue diagnostic connector, shorting it out and counting the code on the check engine light ?

I don't know what that code is you've read, but if it's derived from code 15 then it's ignition output related (coils, wiring, etc)

joegtir
31-08-2011, 12:34
i just pluged the falt reader into the black obd port and went through what it said on the screen and it came up with those falts i did try and delete them but it wouldnt let me , do you know anyone that could look at it for me Scoff ??

Scoff
31-08-2011, 13:38
Not personally joe, sorry, but hondata's UK dealers are abbey motorsport and cpl racing, so either one of those will most likely be able to help, at some cost of course.

joegtir
31-08-2011, 14:27
ok mate thanks again , think i might have got it sorted now

Sparkie
01-09-2011, 00:03
are you using scangauge?

if so....

http://www.cleanmpg.com/forums/archive/index.php/t-15131.html