PDA

View Full Version : Marcel with a low gt turbo from the Netherlands



Marcel
29-08-2011, 21:00
First post!

Hello my name is Marcel from the Netherlands .
My car was bought in sept 2003 al original.
It's a ph2 from 1988 .

http://i15.photobucket.com/albums/a399/marcelgtt/gtt%20projekt/gtzy.jpg

A little later it was time for some Gaz coilovers and a few sets of rims in 15 and 16".
BBS RM 6,5 x15 ET33 with Brigdestone 195 45 15

http://i15.photobucket.com/albums/a399/marcelgtt/gtt%20projekt/BlackWhite3oss2006.jpg

or with Zender Turbo ph1 6x15 ET 40 with 165 50 15

http://i15.photobucket.com/albums/a399/marcelgtt/GTT%20Meetings/goes2008.jpg

or with vauxhall steel rims 6,5x16 ET37 on 165 40 16

http://i15.photobucket.com/albums/a399/marcelgtt/16%20inch%20opel%20staal%20op%20165%2040%2016/opel16inchstaal011-border.jpg

my lasted new sets are the P slot 6x15 Et36

http://i283.photobucket.com/albums/kk301/babdox/wheels/06022009994.jpg

and a set of Speedline Monte Carlo 6x15 ET 45

http://img.photobucket.com/albums/v415/steb/Cars/carparade2006-048.jpg

5 turbo
29-08-2011, 21:18
Lovely selection there fella :agree:

How low is she?

sega
29-08-2011, 21:25
Is it possbile i've seen you @ maurice house. (mbcar..)

Marcel
29-08-2011, 21:32
New poster! (less than 10 posts)


Lovely selection there fella :agree:

How low is she?
about 5 inches :D
http://i15.photobucket.com/albums/a399/marcelgtt/gtt%20projekt/rtctocht20071.jpg

Marcel
29-08-2011, 21:32
New poster! (less than 10 posts)


Is it possbile i've seen you @ maurice house. (mbcar..)
yes it could be .

5 turbo
29-08-2011, 21:48
Yummy :agree: ;)

Marcel
29-08-2011, 22:01
New poster! (less than 10 posts)


Yummy :agree: ;)
it's nice to drive so low but ,i can't get to the UK to the FCS grrrrrrrrrrrrrrrrrrrrrrrrrr
because of the speedbumps and the ramps on the ferry .:cry:

Sparkie
29-08-2011, 22:04
speedbumps are a real problem here....:crap:

Logg
29-08-2011, 22:43
lovely choice of wheels mate. Especially the P slots. :D

djinuk
31-08-2011, 07:41
god they look amazing on them zender turbos!

philg
31-08-2011, 08:06
god they look amazing on them zender turbos!


:agree: Very nice and i love the car

raj
31-08-2011, 10:47
i like the look of them zender rims:agree:

also them vauxhall steels look good too:agree: which vauxhalls came with a 4x100 pcd.?

jamie_clioGTT
31-08-2011, 11:07
dosent look that low, sure youd get over here.

sega
31-08-2011, 14:14
The one from maurice is lower and we drove that one to the uk a couple of times.
You should be ok.

philg
31-08-2011, 14:21
i like the look of them zender rims:agree:

also them vauxhall steels look good too:agree: which vauxhalls came with a 4x100 pcd.?


Novas run this, probably others to.

Lomo
07-09-2011, 10:37
Hey Marcel, welcome to the club.

Thats a beautiful motor you have there. I've been talking to Chris Heemskerk regarding you guys coming over to the National Day next year so make sure you work on him ;)

Rare.
02-10-2011, 15:44
New poster! (less than 10 posts)

really nice, looks especially nice on the RM's..

Marcel
11-10-2011, 16:48
New poster! (less than 10 posts)


Hey Marcel, welcome to the club.

Thats a beautiful motor you have there. I've been talking to Chris Heemskerk regarding you guys coming over to the National Day next year so make sure you work on him ;)
i don't know if i will come with the black one it has i litle but of rust .
maybe i wil break it down .
and i then take all the stuff and putt it on my ph 1 tungsten grey one .
or i wil go to the fcs like each year .
ive spoken to Chris and there is nobody intrested from the rtc to come over .
butt maybe i wil come over .

Rare.
11-10-2011, 19:57
you got any pics of it on the P-Slots yet? :) do love your wheel choices.. man im whoring this thread :p

Marcel
14-10-2011, 09:37
New poster! (less than 10 posts)


you got any pics of it on the P-Slots yet? :) do love your wheel choices.. man im whoring this thread :p
not yet the centerhole must machined out tot 60.1 mm.
And then the poliser can make them bling again.

Alan
17-10-2011, 18:36
Hello:agree:

romain-gtt
26-10-2011, 18:33
New poster! (less than 10 posts)

what a beautiful 5 you've got !

have you got full picture of it with the speedline monte carlo ??

really love Zender's turbo wheels ....:ashamed:

hope you come on RTOC nat day next year as you can meet each other !!!!

Lomo
15-11-2011, 17:14
New poster! (less than 10 posts)


i don't know if i will come with the black one it has i litle but of rust .
maybe i wil break it down .
and i then take all the stuff and putt it on my ph 1 tungsten grey one .
or i wil go to the fcs like each year .
ive spoken to Chris and there is nobody intrested from the rtc to come over .
butt maybe i wil come over .

How disappointing! :(

I'll speak to Chris and see whats happening. We would really like for some of you guys to come over!

Spooky
15-11-2011, 19:23
Very fcuking nice!!!

Tony Walker
15-11-2011, 20:45
would be fantastic if you guys could make it over :D more 5's the better, especially considering its a big occasion :)

Marcel
16-11-2011, 17:30
New poster! (less than 10 posts)


New poster! (less than 10 posts)

what a beautiful 5 you've got !

have you got full picture of it with the speedline monte carlo ??

really love Zender's turbo wheels ....:ashamed:

hope you come on RTOC nat day next year as you can meet each other !!!!
yes i wil come to the nat . day i think.
no pictures of the speedlines yet..:cry:
the center is milled out to 60,1 mm
now to get them shine like mad it wil take a little time and lots of money .
and then there is the tyre choice .

but i wil make an projekt topic of the thungsten 5 .
where de p slots or de speedline rim wil go under.
next year.

Marcel
02-02-2015, 19:27
so the black one is in storage .
why???
because an friend of me would sell his raider with EFI

http://i15.photobucket.com/albums/a399/marcelgtt/5%20GTTI%20bleu%20sport/renault5gtti_0126.jpg (http://s15.photobucket.com/user/marcelgtt/media/5%20GTTI%20bleu%20sport/renault5gtti_0126.jpg.html)

http://i15.photobucket.com/albums/a399/marcelgtt/5%20GTTI%20bleu%20sport/renault5gtti_0121.jpg (http://s15.photobucket.com/user/marcelgtt/media/5%20GTTI%20bleu%20sport/renault5gtti_0121.jpg.html)

the 2 injectors

http://i15.photobucket.com/albums/a399/marcelgtt/5%20GTTI%20bleu%20sport/Renault5gtti021.jpg (http://s15.photobucket.com/user/marcelgtt/media/5%20GTTI%20bleu%20sport/Renault5gtti021.jpg.html)

De MBE300pro turbo

http://i15.photobucket.com/albums/a399/marcelgtt/5%20GTTI%20bleu%20sport/renault5gtti_0138.jpg (http://s15.photobucket.com/user/marcelgtt/media/5%20GTTI%20bleu%20sport/renault5gtti_0138.jpg.html)

only things a changed where the wheels ofcourse .
the turbines are very populair .
so i changed them for my Zenders Turbo's phase 1

http://i15.photobucket.com/albums/a399/marcelgtt/5%20GTTI%20bleu%20sport/IMG_8819.jpg (http://s15.photobucket.com/user/marcelgtt/media/5%20GTTI%20bleu%20sport/IMG_8819.jpg.html)

http://turborenault.co.uk/data/MetaMirrorCache/farm8.staticflickr.com_7529_15508096997_30ea5d7f5d _c.jpg

zo de Renault wat ie er aan verandert tov het orgineel.

it hase an bigbrake conversie 285 mm discs ds 2500 pads en goodridge hoses .
lowered and Koni shocks.

Engine:
stage 2 MB Carperformance revisie set.
270 cam.
low compresion pistons .
MBE 300 turbo .
.
r 5 diezel rad
2,5"' K tec slash cut exhaust
uitlaat K tec 2,5" slash cut
Helix 4 padle clutch met soft pedal conversie.
clio 1 1.8 16v ecu with alterd loom (turbo)

end then you get :
at 1,6 Bar boost 192,9Whp en 259 N/m at the wheels
this setup is running sinds 2009 with lots of fun.

http://i15.photobucket.com/albums/a399/marcelgtt/5%20GTTI%20bleu%20sport/080320093881.jpg (http://s15.photobucket.com/user/marcelgtt/media/5%20GTTI%20bleu%20sport/080320093881.jpg.html)

this is the EFI set a have:

https://scontent-a-ams.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/1069128_489251321154141_1397659214_n.jpg?oh=a63c8d 95c599656ed35ed6c67fe742de&oe=553DA3A9

changes for 2015

the original calipers wil be swapped for 4 pots Hi Spec ones.
xrd display mounted in the dubbeldin console
the hole interieur wil be flocked
Gaz coilovers ,it isnt low enough .
the wheels for 2015 :
option 1
15 " P slots polisted
or the 15" Speedline Monte Carlo's

Mr Raider
02-02-2015, 22:04
Nice raider, one 5 is never enough! ;) :agree:

Scoobykilla
03-02-2015, 08:28
Loving the raider :)

Trevhib
03-02-2015, 10:21
Very nice Marcel :agree: Looks like those Zenders could take a 5mm spacer :)

Cool slash-cut exhaust.

Marcel
03-02-2015, 15:10
Nice raider, one 5 is never enough! ;) :agree:

no .
thats why a have 4 of them and one coupe :confused:

Loving the raider :)
thanks :agree:

Very nice Marcel :agree: Looks like those Zenders could take a 5mm spacer :)

Cool slash-cut exhaust.
yep a know the turbines have the 5mm spacers