Negative camber

[boustie]

Fitted 35mm springs but theres loads of neg camber as in visually lots.
any ideas ??

[Andrew Cooke]

did you take the opportunity to replace anything else whilst swapping the springs?

[SCHWARTZ]

make sure the top hats are on the right sides;)

[boustie]

are the top hats sided ??

[Woznaldo]

Yes if they're phase 2.

[Andrew Cooke]

Yes if they're phase 2.

but that won't give you more camber

[boustie]

how do i know if ive got the tops the correct way round ??

[Andrew Cooke]

if you look from above the damper tops should be more towards the windscreen than the headlights

[SCHWARTZ]

They shouldnt affect the camber but I had 2 passenger sides on and the drivers side defo had more camber.

[markey b]

are you using standard shocks? there is a bit of movement on some aftermarket shocks which give a bit of camber adjustment, try loosening the 18mm bolts that hold the strut to the hub, and pull the top out, hopefully pulling the top of the wheel out, then obviously retighten, and get your tracking checked after doing anything suspension related