Anyone able to replace Dial faces on my clocks?

[adscan]

I have got a replacement set of OE clock dials (orange dials) for my turbo. Had a little look at them but don't want to screw up my original clocks fitting them.

Anyone on the forum done this before and confident at not bricking my clocks. Willing to pay etc.

Many thanks.

[Phoenix Autosport]

Did mine a couple of weeks back, happy to do another set for a few quid, where abouts are you based

[adscan]

Based in Herts. Happy to post the clocks out to you. :)

[Gttnutter]

There is a guide to fitting them with pictures etc.

It's very straight forward and you'll have it done in half an hour when the clocks are in your hands. All you need to do is make note of where the needles sit by measuring them off the edge of the clocks.
Give it a crack and I'm sure you'll pat yourself on the back after!

[adscan]

I had a goon a set of broken clocks. Speedo and rev counter were straight forward. Screwed up the small gauges though.

I would rather give the job to somebody that could do it spot on. As I would always be looking at the mistake that I may make.

[markey b]

i'll do it FOC if you post em out, RTOC love!

[adscan]

i'll do it FOC if you post em out, RTOC love!

PM on way.