f7p charge cooler barrel size

[sega]

Ok i recently bought an unfinished project that need a charge cooler. I've seen a pwr 100mm x 2900mm barrel but with 57mm inlet/outlet. Would this be big enough it wouldnt get much heat since it wouldnt sit anywhere near the turbo. Pics of the car on my profile. I'm planning on running 1.5bar boost because it has the lowered comp pistons so it would go over 300hp easy and i cant find the right barrel on the pwr website.:confused:

[James5]

Ok i recently bought an unfinished project that need a charge cooler. I've seen a pwr 100mm x 2900mm barrel but with 57mm inlet/outlet. Would this be big enough it wouldnt get much heat since it wouldnt sit anywhere near the turbo. Pics of the car on my profile. I'm planning on running 1.5bar boost because it has the lowered comp pistons so it would go over 300hp easy and i cant find the right barrel on the pwr website.:confused:


Personally I would go large intercooler but if you want chargecooler I would be looking at least at this one

http://www.chargecooler.co.uk/index.php?main_page=product_info&cPath=67&products_id=193

Another F7p turbo they are popping up everywhere :laugh: What turbo you using?

[sega]

This was a build a friend of mine started in 2007 the engine ran stationary and that was it. Parts were a lot more rare and expensive in those days so he quit after starting his own business and put it in a stable. where it was untill last weekend :D So now i need a charge or intercooler.
The turbo is a gt28R(s) all parts are new but the immobilizer is stopping me from starting her up. Going to have to take it out.:scratch:

[HAndy]

Personally I would go large intercooler but if you want chargecooler I would be looking at least at this one

http://www.chargecooler.co.uk/index.php?main_page=product_info&cPath=67&products_id=193

Another F7p turbo they are popping up everywhere :laugh: What turbo you using?


running that pwr chargecooler in mine , air temps where pushing 65 degrees @21psi on gt3071 , now in the middle of re think on cooler intakes:scratch:

[steer from the rear]

I do love a charge cooler but I'd say loose half the front and go intercooler but the pipe work is a nightmare, I had to buy a aluminium donut to weld to my intercooler as I couldn't get a bend tight enough so if I were to do it again I'd get one of the intercoolers that has a inlet and outlet on the same side but what they flow like internally I don't know

[Sparkie]

take a look at this ebay seller ;)
http://myworld.ebay.co.uk/votionspeed/

[Os8472]

take a look at this ebay seller ;)
http://myworld.ebay.co.uk/votionspeed/

Bloody hell, that's cheap for barrel coolers, anyone tried 1 ?

[steer from the rear]

Bloody hell, that's cheap for barrel coolers, anyone tried 1 ?

So cheap he sold them all and has no items for sale :scratch:

[HAndy]

running that pwr chargecooler in mine , air temps where pushing 65 degrees @21psi on gt3071 , now in the middle of re think on cooler intakes:scratch:

made a mistake mine is the 4 " dia version :ashamed: had a measure up today:rolleyes: hence the higher intake temps at a guess :laugh::laugh:

[Sparkie]

So cheap he sold them all and has no items for sale :scratch:


http://www.ebay.co.uk/sch/votionspeed/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

[stu21t]

I might give 1 of these a try.
I will do a bit of research and let you know how i get on.

[Os8472]

Looking at Handy's PWR barrle job the cores are quite different

PWR
http://www.rtoc.org/boards/picture.php?albumid=449&pictureid=2869

Votion
http://www.rtoc.org/boards/picture.php?albumid=449&pictureid=2870

[Logg]

Looking at Handy's PWR barrle job the cores are quite different

PWR
http://www.rtoc.org/boards/picture.php?albumid=449&pictureid=2869

Votion
http://www.rtoc.org/boards/picture.php?albumid=449&pictureid=2870


wow my old PWR set up that I couldn't get to work had a core like the bottom ebay one. onder if mine was a knock off. :cry:

[tubby5]

My pwr kit and my dads are the same as the bottom pic,also my old pwr kit was the same as the bottom pic and I'm sure there's a pic the avt site showing it like the bottom pic?also our kits have performed great,with my dads turbo 2 inlet temps never going above 35c @ 23psi @ wot
Maybe handys kit is a new version or old version??

[tubby5]

http://www.advancedvehicletuning.co.uk/index.php?main_page=privacy

Here's what ours look like,which is different to both of them pics

[Sparkie]

my (Marts old one) pwr also looked like the bottom picture.

[stu21t]

http://www.bellintercoolers.com/
Worth a look, i havent had time to get prices yet but will soon.