setting acc pump arm on carb

[Nayls]

has anybody got pics of how you set it to 5mm with a drill bit??

I know i sound dumb but im unsure how i position the drill bit :cartman::laugh: does the butterfly rest on the head of the drill bit? or the side?

pictures pretty please! :cartman:

[Nayls]

anybody?

[James5]

anybody?


Come on Gary you must remember the 5mm drill bit method:agree:

[Nayls]

Come on Gary you must remember the 5mm drill bit method:agree:


no :( never done it before,always left it as it was.

do i open the throttle & then slide the drill bit down and let the butterfly rest on the side of the drill bit?? would have to be wound in a lot like that though???

[James5]

no :( never done it before,always left it as it was.

do i open the throttle & then slide the drill bit down and let the butterfly rest on the side of the drill bit?? would have to be wound in a lot like that though???

:agree:as you say then adjust the bolt on the acc pump end so that it is fully pushing the acc pump in at this point:agree:

[Fordy]

don't you have to hold the drill bit flat on the inside of the Carb aswell?