PDA

View Full Version : wing screw part number



Jimmy_GTT
07-08-2011, 13:17
Hi,

I'm searching for the part number of the screw which holds the front and rear wings.

This one:
http://www.renaultclub.hu/Jimmy/wing_screw.jpg

Thanks!

paul b
07-08-2011, 14:32
sorry to say, don't think that's a separate part,,, came glued into the arch moulding

Ashy
07-08-2011, 15:25
use number plate fixing screws, cut the heads off and superglue them into the arch then use the plastic nuts to secure them in place... Don't rust after a few years which is a bonus!!

Jimmy_GTT
07-08-2011, 15:36
use number plate fixing screws, cut the heads off and superglue them into the arch then use the plastic nuts to secure them in place... Don't rust after a few years which is a bonus!!

Sounds good, but I do not know that screw. Do you have a picture of it?
Where can I buy such a screw?
Thanks

Purple_rob
07-08-2011, 17:53
I have some good comdition spares in you need mate. Will ask a couple of quid for them as I bought arches and only retrieved the good fixings. Unfortunately the arches were always below standard.

How many are you after, and I believe the front and rears are different.



Rob

Purple_rob
07-08-2011, 18:19
MMM, must have used more when fitting mine than i thought.

This is all I have, sos picture was from the phone.

Jimmy_GTT
07-08-2011, 18:33
These are a bit different. Maybe these ones are for the front wings. What I'm searching for is for the rear wings. I'll ask a turner tomorrow if he can make me such screws.

Jimmy_GTT
21-08-2011, 20:52
The turner did a great job. He told me that he has regreted this task several times. :D

http://www.renaultclub.hu/Jimmy/screw.jpg

jack joy
22-08-2011, 23:05
Assuming I'm not barking up the wrong tree,here are the part numbers,if you still need them.
Rear screw--77 03 072 050
Front screw-77 03 077 225

;)

Jimmy_GTT
23-08-2011, 06:10
Assuming I'm not barking up the wrong tree,here are the part numbers,if you still need them.
Rear screw--77 03 072 050
Front screw-77 03 077 225

;)

Thanks mate!
I won't tell it to the turner. :D