Bass J
18-07-2011, 19:49
Hi folks
Some of you may know that i destroyed my turbo on route to mallory/FCS this year. After getting the car home the oil is gunky again ..after doing the headgasket a few weeks before.. we noticed the piston had damage.
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/215535_10150593620990585_502785584_18568500_251956 1_n.jpg
But we decided to chance it and go for it lol
So were are gunna do the rings and check the bottom end when the engine is out ..what would i need ..ive already priced -
1.Headgasket kit (corteco)
2.piston rings (goetze) - from euro carparts
3.timing chaing gasket
4.sump gasket (which comes with the two rubber gaskets for the side)
Is there anything else i have missed out? ..obviously ill need oil and coolant ..which ill get from my work.
Obviously a decent piston will be needed ..markey mark is sending me up his spare piston that was machined to size of this engine spec :smokin:
Cheers :)
Some of you may know that i destroyed my turbo on route to mallory/FCS this year. After getting the car home the oil is gunky again ..after doing the headgasket a few weeks before.. we noticed the piston had damage.
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/215535_10150593620990585_502785584_18568500_251956 1_n.jpg
But we decided to chance it and go for it lol
So were are gunna do the rings and check the bottom end when the engine is out ..what would i need ..ive already priced -
1.Headgasket kit (corteco)
2.piston rings (goetze) - from euro carparts
3.timing chaing gasket
4.sump gasket (which comes with the two rubber gaskets for the side)
Is there anything else i have missed out? ..obviously ill need oil and coolant ..which ill get from my work.
Obviously a decent piston will be needed ..markey mark is sending me up his spare piston that was machined to size of this engine spec :smokin:
Cheers :)