b18ft t28 owners please help??

[REGGY5GT]

ive recently got my 5 running with the t28 on and i have a problem,now the problem i have is i havent joined the pipe up yet that goes from the block breather at the front to the turbo intake, ive started the 5 and runs fine but then smokes a lot but if i put my finger in the block breather pipe it stops smoking,does it have to be joined up to the turbo intake to not smoke or can i blank it?? any help or much appreciated:agree:

[REGGY5GT]

may i also add that the idle control valve has been taken off and blanked if this would affect it.

[philg]

Im not running a t28 but my breather pipe just ran a mini filter on it, now i have a catch can on.

[SCHWARTZ]

when mine is working my t28 dosnt smoke and all i have is a little filter plonked on the breather pot. if you think about it the turbo intake would kind of suck through to the breather pot so if anything id say it would be worse with that on than open to atmosphere if plugging it with your finger stops the smoking:scratch: