PDA

View Full Version : Wiring ID help needed (pic heavy)



boysie
05-06-2011, 19:53
Right, long story short..
When i started restoring the car all the wiring was really bodged,chopped, patched, and with remains of 3 different alarms on loom, so i repaired what i could, and got a new engine loom,

Problem now is that was a year ago! and theres some bits that if im honest i dont have a clue what they are! i took loads of photos of what i did but they were on an old phone i got rid of!:sad2:


so heres what i left with, if anyone can identify them and tell me where they go i will be forever in your debt!




this is on drivers side bulk head comes up through bottom of bulkhead in an rectangular rubber bung, there were relays wired into these originally
http://www.rtoc.org/boards/picture.php?albumid=1396&pictureid=16442






these 3 wires, 2 black and one fatish white ( or salmon?) wire, comes from big loom coming through firewall by side of fan, then goes down through bulkhead
(pic sideways!)
http://www.rtoc.org/boards/picture.php?albumid=1396&pictureid=16443





Random relay coming off loom that comes through by side of fan

http://www.rtoc.org/boards/picture.php?albumid=1396&pictureid=16445




2 green wires, 1 seems to come direct from battery terminal, other comes from the loom by fan again, maybe from the random relay above?http://www.rtoc.org/boards/picture.php?albumid=1396&pictureid=16446



these 3 wires come up through bottom at side of battery tray

http://www.rtoc.org/boards/picture.php?albumid=1396&pictureid=16447



any help would be greatly appreciated :agree:

Fordy
06-06-2011, 19:56
the first picture is a brake pad sensor wire :agree:

the rest i cannot help with sorry :(