PDA

View Full Version : aquamist reliability



markey b
16-05-2011, 15:50
just a quick one,

has anyone had any issues with aquamist pumps and relays? twice now my engine has popped, i think both times due to det when the system has failed!

i'm on my 3rd relay and had to rebuild the pump last night as the pressure was almost non existant!

James5
16-05-2011, 15:56
just a quick one,

has anyone had any issues with aquamist pumps and relays? twice now my engine has popped, i think both times due to det when the system has failed!

i'm on my 3rd relay and had to rebuild the pump last night as the pressure was almost non existant!


A few years back I had a problem with my previous aquamist setup (not the one I just sold that worked perfectly fine and I only ran meth mix through it:laugh: my old old kit is in dorset and on a cossie - just wanted to clear that up:laugh:) in that the Pump did what yours has done cleaned it up and didn't last much longer ended up buying another pump. Are you using meth mix of just water??

Never had a relay problem though, use an ERL relay on my rad fan switch:D

Sparkie
16-05-2011, 17:29
i heard there were two versions of the pump. dont they get hot and cut out or summat like that?

i used the flojet /shurflo kit and didnt have a problem.... but the pump is much bigger.

markey b
16-05-2011, 17:51
mine is the 'race pump', absolute pig to take apart!

mine was getting hot yesterday but think that was due to it being low pressure, with hardly any flow through

was running about 30% meth to 70% evian, but have a 7l tank so have never used it up, so the meth has probably evaporated out years ago

steer from the rear
16-05-2011, 18:43
I bought mine 2nd hand of a dude with a gt4 he said had a display with charge temps on his laptop and said he never noticed a difference.........that's because it didn't work when it came on boost!. I got on there forum and told them about it not working and one of the members sent me the PCB that goes in the pump. I think it was all just plug and play (it was so long ago) worked after though so I sold it :sad2:

JP Racing
16-05-2011, 22:13
Marky my aquamist pump went wrong a while ago and as sparkie said i moved onto a different setup and have a spare WI kit if needed :)

markey b
17-05-2011, 10:51
Marky my aquamist pump went wrong a while ago and as sparkie said i moved onto a different setup and have a spare WI kit if needed :)

txt me how much you are after fella, i can't be dealing with another pop due to the pump/relay failing, i usually find out after its happened lol

Eugein Offord
17-05-2011, 16:30
Dr Glen T used a gtt fuel pump set up with a test button under the bonnet to check each day... btw... evien is a mineral water so is not good for any thing that goes through small pipes............distilled is the best.......

markey b
17-05-2011, 17:40
i'll get some distilled instead... oops!

JP Racing
20-03-2013, 17:16
Is this the thread marky when you got the parts from ERL :)

LYNCHSTAR
20-03-2013, 18:17
ive had a problem with my pump to ive had to disconnect it cause its on all the time and makes a strange noise is this the relay that could be knackard. ???

markey b
20-03-2013, 22:59
Is this the thread marky when you got the parts from ERL :)

I think I sent it back to them around the time I posted this, iirc he tested flow and it was ok after I flexed seals, so I don't think they rebuilt it