Congrats to Glenn Hi5

[Brigsy]

Just got a text off glen, done 11.09@127, badass c1j gt turbo power! :agree:

http://www.youtube.com/watch?v=StMHMvm-huw&feature=mfu_in_order&list=UL

[SCHWARTZ]

what a run well done glenn keep it up :D

[SCHWARTZ]

sure showed that crapri whos boss:laugh:

[Scoff]

Who needs a 2L engine :D

Well done glenn, a lot of hard work paying off. 10's arn't far away :)

The best of it is, that is with half the amount of nitrous it ran last year ! The new engine is performing better than we could have hoped for.

[BabybluGTT]

New poster! (less than 10 posts)

Congrats to all involved ;)

[Logg]

Wow that's so close. Well done that man.... :agree: 127mph that's shifting. :smokin:

[Rob@Backyardracing]

awesome mate! flying :)

lets hope you dont get the curse of the .0`s lol

[Rob@Backyardracing]

lets see the incrementals...

[djinuk]

blooody hell , well done chap

[SCHWARTZ]

chris whats the difference with this years engine then why is it performing so much better?

[jesus in the seat of a 5]

well done glen buddy....amazin.....:smokin:..did the capri stall....:wasntme:

[Gibbo69]

well done matey :)

[Big Steve - Raider]

'kin awesome job Glenn!!

Great for an RTOC member to be bringing the C1J crown back to the UK!! :niceone:

Funny how the two guy's slugging it out for the title both have names beginning with G, Glenn & Gianni?? :scratch: Anyone ever seen them in the same place? :laugh:

[Tony Walker]

is this with your old cam scoff? thats frustratingly close. incredible!!!:agree:

[stuTHC]

Good stuff pal :agree:

[SCHWARTZ]

who's gona update the 1/4 mile leader board then:D

[Ashy]

Well done Glen, Awesome time!!

[Hi 5]

lets see the incrementals...
60 ft 1.70
330ft 4.78
1/8 7.22
1/8 100.32mph
1000 et 9.32
1000 mph 116.57
1/4 et 11.09
1/4 mph 127.01
oh yes and not at full power almfao:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D :D

[SCHWARTZ]

well done fella you deserve those times;)

[Matt Cole]

60 ft 1.70
330ft 4.78
1/8 7.22
1/8 100.32mph
1000 et 9.32
1000 mph 116.57
1/4 et 11.09
1/4 mph 127.01
oh yes and not at full power almfao:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D :D


Awesome mate just awesome!

[Tim B]

Awesome :smokin:

[Hi 5]

Awesome :smokin:
thanks all for comments i will try a little harder tommorrow :D

[SCHWARTZ]

up the nos:D:D:D:D

[JRP]

Just watched it on facebook, awesome! well done chap :agree:

[The new Bill J]

That's silly fast! Congrats :agree: :cool:

[raider_gtt]

Well done glenn needed to be done!

[Adey aka Ewok]

thanks all for comments i will try a little harder tommorrow :D

in the 10s!!!!! whats the plan for today? run the same setup or will there be any increase in power?

[BluntyR5GTT]

great news glen it was obvious that you were going to beat gianni this year :)

[Lomo]

One word..BOOM! :cool:

[Mart]

Good darts :agree: :cool:

[TNT ANDY]

That's for all you F4R's, Fp7's B18's out there. ;)

[5teve L]

Good luck for today, so close to running a 10 now, awesome to what can be done with the C1J with a little experimenting

[Woznaldo]

Awesome effort mate. Good luck for today. :agree:

[GTphil]

:D Thats awesome!

[R5TURBORON]

Well done fingers crossed for 10s :-D

[REBEL GT TURBO]

Awesome stuff!

[Dave Reed]

Well done fella, that's f'ing quick!

[Scoff]

Today would have been an eye opening day for the C1J lovers out there. Glenn put in a fantastic launch in qualifying with a little more power than yesterday making a 1.6 60' and 103mph at the 1/8 only to drop a valve flat shifting from 3rd to 4th :crap: That would almost certainly have been a 10 second pass. What were the chances of that. It's never dropped a valve before and to do it on such a potentially great pass is a kick in the arse. But, if I know glenn, a buggered valve won't get in his way.

Check out the video. It's only qualifying so pay no attention to the reaction time. He's racing James hodson, ex UK FWD champion, mid 10sec 20v turbo + nitrous car. Watch glenn real him in mid track!! James ran a 10.9 on that run and glenn was making ground on him, so maybe a 10.8 might have been on the cards.

http://www.youtube.com/user/hi5tuning#p/a/u/0/AobN4dOnzD0

[GTphil]

:( What a pisser! Pesky valve collets:crap:

[Matt@CodeRedMotorsports]

**** luck!!:crap:
Scoff, where did the valve fail at the collet end or the head end?

Dunno matt, he's not pulled it in bits yet. As rob says, should be worth measuring incase it's trying to pull the heads off the other valves too.

[Markey Mark (BD)]

Thats real shame, did watch that vid and realise he wasn't only staying with James but actually powering past him, can spot when valve drop happened too which is real downer as did look like the magic run. ;)

Good going anyway lads, looks like the new spec is certainly working in the right direction. :)

Any ideas as to why it dropped?

[Adey aka Ewok]

**** times, is it an easy fix as in stock valves and head or is all that lot custom?

[Scoff]

is this with your old cam scoff? thats frustratingly close. incredible!!!:agree:

Yes, the old cam from my last C1J. That and a couple of other engine changes have really made it breath.

[Scoff]

**** times, is it an easy fix as in stock valves and head or is all that lot custom?

Nah, fancy valves but they're available singular so it's not the end of the world. Hoping his head is OK, that won't be easy to replace. Piston probably fubar also.

[Scoff]

Any ideas as to why it dropped?

Dunno mark. rev limit is something like 8400rpm so it'll have been on that during the shift. It might want stronger springs but I'd be worried what they'd do to the cam lobes. Glenn says it feels to go pretty well without the flat shift so maybe just avoid those in the future.

[REBEL GT TURBO]

So close!:cry: Looked very quick!

[REBEL GT TURBO]

When you say flat shift you mean no clutch?

[JRP]

When you say flat shift you mean no clutch?

Flat on gas pedal or not lifting off it when changing gear...?

[Logg]

Wow he was really shifting. poor show on the valve. :cry:

Not to sure about the golf rear spoiler. :wasntme:

Hope you guys get it back together soon and rock the pod with a 10SQM C1J :smokin:

[Markey Mark (BD)]

Dunno mark. rev limit is something like 8400rpm so it'll have been on that during the shift. It might want stronger springs but I'd be worried what they'd do to the cam lobes. Glenn says it feels to go pretty well without the flat shift so maybe just avoid those in the future.


Does Glen run single valve springs? Wonder if its worth looking into double ones if he does, know there meant to be abit more gentle on the cam lobs.

[REBEL GT TURBO]

Flat on gas pedal or not lifting off it when changing gear...?


Ahh i seeee...Why not use a sequential gearbox?? I know there like 3K:eek: But gotta be the way forward:confused:

[Scoff]

Glenn will get it back together in no time. I think he was more pleased that his new gearbox setup and clutch worked well. :)

[Ashy]

Thats mint, 11.4 seconds with a dropped valve!

Rotten luck - shows its going to be possible to do on that setup tho!

[Rob@Backyardracing]

its quite common place in the honda world to drop a valve, they say heavy springs stretch the valves, and if you get them hot enough they fail. may be worth pulling a few valves out and measuring see if they any longer...

good job anyway guys, 103mph 1/8th is spot on for a high 10 :)

[Scoff]

For comparison my 144mph runs had 110mph at the 1/8th, so the C1J isn't a million miles off.

Rob, good advice :)

[Sparkie]

i thought when they made valves, they welded the tulip onto the stalk. with the stronger springs they have more stress on them - more likely to break?

[danielmk323]

you make c1j so good i have big respect for you man :agree:

[TNT ANDY]

Hard luck Chap - soooooooo close.

In the words of the Fast and the Furious

"Monica......................................Nooooo ooooooooooooooooooooooooooooooooooo"

Maybe at the Frog??

Now that would be something, got me fingers crossed for you.

Stotty.

[Rob@Backyardracing]

i thought when they made valves, they welded the tulip onto the stalk. with the stronger springs they have more stress on them - more likely to break?

Correct, they are fused together, there is also different materials of stems out there.

[Hi 5]

Ahh i seeee...Why not use a sequential gearbox?? I know there like 3K:eek: But gotta be the way forward:confused:
they carn't take the power so no good :D

[Ashy]

i thought when they made valves, they welded the tulip onto the stalk. with the stronger springs they have more stress on them - more likely to break?

Nope, the valve manufacturing plant I've been into forged the complete valve from 1 piece of material!

[Hi 5]

its quite common place in the honda world to drop a valve, they say heavy springs stretch the valves, and if you get them hot enough they fail. may be worth pulling a few valves out and measuring see if they any longer...

good job anyway guys, 103mph 1/8th is spot on for a high 10 :)
top advice son going to use bigger valves now :D10s are round the corner but the main thing is having the top c1j and a 11.0 good enought for me :laugh:

[i l k e r]

hats off to both of you guys :agree:

what a run, makes me wanna stick with the c1j :eek:

better luck next time Glen, I can almost smell a 10sec pass there :agree:

[Hi 5]

smell a 10 no problem son car is nearlly done warning to people using metro turbo valves in there head dont there **** :D:D:D:D:D:Dcarnt take a little power :crap:

[Ron]

Did you use standard metro turbo valves or some aftermarket ones? The standards are two piece and have been known to break!

I know the mini will never hit a 10 but interesting to know. Awesome times as well good to see your car get faster every year.

Ron

[Hi 5]

Did you use standard metro turbo valves or some aftermarket ones? The standards are two piece and have been known to break!

I know the mini will never hit a 10 but interesting to know. Awesome times as well good to see your car get faster every year.

Ron
sodium filled ones pal should have been ok but sadly not

[Karlos]

good stuff matey :-) ... Now crack on ;-)

[Hi 5]

good stuff matey :-) ... Now crack on ;-)
you have woken up then waiting to see how long before you read it lol :D:D

[TommyB]

Wow Glen, stunning mate, Your so going to run a 10 next time out.

:agree:

[Hi 5]

Wow Glen, stunning mate, Your so going to run a 10 next time out.

:agree:
chear buddy fingers crossed ;)

[Karlos]

you have woken up then waiting to see how long before you read it lol :D:D

lol, its the age matey :p

[Hi 5]

another new build just finished managed to do a new head with even bigger valves new pistons and new turbo so 10s here we come lol:eek:

[stuTHC]

:agree: when are you running next?

[Rob@Backyardracing]

swift work mate, you dont hang around! :)

you got that 6262 billet on it? that would make the numbers alright :D

[Brigsy]

Thats the game mate, are you down at york this weekend??

[Logg]

swift work mate, you dont hang around! :)

you got that 6262 billet on it? that would make the numbers alright :D

I was just looking for the smallest Billet turbo they do the other day. lol :wasntme:

If you are running one now Glen I'd love t know how well it works off NOZ. :)

[Scoff]

The turbo specification remains the same, but bits of dead valve had smashed some blades off the turbine wheel so it needed changing. 6262, yeah right ;)

[Rob@Backyardracing]

good good :)

you know injector dynamics (bosch to you and me) do 725cc injectors now aswell,
all the cool kids are on high pressure fuel systems now :)

[Andrew Cooke]

good good :)

you know injector dynamics (bosch to you and me) do 725cc injectors now aswell,
all the cool kids are on high pressure fuel systems now :)

what's high pressure?

[Hi 5]

me and scoff just been out mapping car now pulling 35psi in 4 lol:scared:turned the gas on ;)making more power again and my be at york mr b you coming with the van son :D

[Hi 5]

check the vid out on the boost gauge :D:D:D:D:D
http://www.youtube.com/watch?v=t4hj4P8aOkk (http://www.youtube.com/watch?v=t4hj4P8aOkk)

[Karlos]

check the vid out on the boost gauge :D:D:D:D:D
http://www.youtube.com/watch?v=t4hj4P8aOkk (http://www.youtube.com/watch?v=t4hj4P8aOkk)


Time for a new gauge :) Good turn around peeps :) :agree:

[scott 5gtt]

check the vid out on the boost gauge :D:D:D:D:D
http://www.youtube.com/watch?v=t4hj4P8aOkk (http://www.youtube.com/watch?v=t4hj4P8aOkk)

:devil: quality glenn .. me and brigsy are at york monday hope to see you do a run there :D

[Hi 5]

Time for a new gauge :) Good turn around peeps :) :agree:
nice picture need one of them any one got one for sale :D
is 2 weeks fast enough then lol:cool:

[Karlos]

nice picture need one of them any one got one for sale :D
is 2 weeks fast enough then lol:cool:

... takes two weeks to find the garage keys these days :crap: *lol*

[Rob@Backyardracing]

what's high pressure?


yeah yeah i know about the f1 cars, a lowly 100bar :eek:

[Hi 5]

good good :)

you know injector dynamics (bosch to you and me) do 725cc injectors now aswell,
all the cool kids are on high pressure fuel systems now :)
can you get price on some of these injectors son ;)

[Scoff]

check the vid out on the boost gauge :D:D:D:D:D
http://www.youtube.com/watch?v=t4hj4P8aOkk (http://www.youtube.com/watch?v=t4hj4P8aOkk)

Thats 4th gear on a private test track :)

[SP33DY]

can you get price on some of these injectors son ;)

I just bought a set of ID850's and think they came in at just over £310 :eek:

Did you use that gearbox that I gave Specky for you? What was it like inside when you opened it up?

[Rob@Backyardracing]

yeah thats about the going rate, and ideally you need to match them up with the bosch 044 pump which can sustain a high pressure supply, (with a suitable high pressure regulator).

[Hi 5]

I just bought a set of ID850's and think they came in at just over £310 :eek:

Did you use that gearbox that I gave Specky for you? What was it like inside when you opened it up?
not opened it yet will do at some point thanks anyway

[Hi 5]

yeah thats about the going rate, and ideally you need to match them up with the bosch 044 pump which can sustain a high pressure supply, (with a suitable high pressure regulator).
thats wot am using son :D:D:D:D:D:D:D:D:D:D:D:D