PDA

View Full Version : bonnet to engine bay seals..?



raj
05-11-2008, 18:00
could someone tell me if the engine bay came with seals on the pink lines in the pics below? my last 2 5's had them there aswell as the other areas that ive highlighted.

im after the orange, yellow and pink if it exsists

http://i99.photobucket.com/albums/l284/R5_GTT/raiderenginebay.jpg

Brigsy
05-11-2008, 18:10
As far as i know they only have the seals on the scuttle area. I imagine they would foul the underbonnet heat proofing from new.

car.crash
05-11-2008, 18:12
just buy some edge trim and do the whole lot, i did and it looks alot tidyer.

Big Steve - Raider
05-11-2008, 18:14
WYSIWYG - What you see is what you get.

The car was never supplied with seals in the Pink area.

Orange = 77 00 762 018 WEATHER STRIP N5

Yellow & Red (Cut the Yellow bits off the long bit for the Red) = 77 00 682 274 RUBBER BONN/SEAL

There is a seal at the leading edge of the bonnet as shown in my engine bay.

car.crash
05-11-2008, 18:29
http://cgi.ebay.co.uk/EDGE-TRIM-and-seal-for-Car-or-Boat-to-fit-1-0-3-0-mm_W0QQitemZ300269965169QQcmdZViewItem?hash=item30 0269965169&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318

somthing like that, measure the width of the item you want to seal first and measure the total length required.

Big Steve - Raider
05-11-2008, 18:31
http://cgi.ebay.co.uk/EDGE-TRIM-and-seal-for-Car-or-Boat-to-fit-1-0-3-0-mm_W0QQitemZ300269965169QQcmdZViewItem?hash=item30 0269965169&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318

somthing like that, measure the width of the item you want to seal first and measure the total length required.

Yeah that's the stuff for Mr Orange!

raj
05-11-2008, 18:38
http://cgi.ebay.co.uk/EDGE-TRIM-and-seal-for-Car-or-Boat-to-fit-1-0-3-0-mm_W0QQitemZ300269965169QQcmdZViewItem?hash=item30 0269965169&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318

somthing like that, measure the width of the item you want to seal first and measure the total length required.

kool, now i just need the yellow bits :)

Bigfoot
05-11-2008, 18:45
Is there supposed to be two rubber bits on the battery side (marked yellow) ?

raj
05-11-2008, 18:58
Is there supposed to be two rubber bits on the battery side (marked yellow) ?
yes, one on each side of the car

Bigfoot
05-11-2008, 19:00
yes, one on each side of the car

Read the question again ;)

raj
05-11-2008, 19:13
Read the question again ;)

oh sorry :rolleyes: that should be -

no, theres just one on each side of the car! :D

Bigfoot
05-11-2008, 20:09
Thats interesting, as have seen two on one side on a friends car, and had not seen it before. There is a lip to where it gets placed on.

Is that a definate that there is only 1 each side?

Brigsy
05-11-2008, 20:53
Only one next to the batt on all the gtt's ive worked on.