ph2 suspension on a ph1?

[Penfold aka The Dealer]

I have some koni suspension, i believe it came of a ph2 car, can this be made to fit a ph1? If so whats involved?

[Thundercat]

Hi penfold, i'm sure phase 1 can be converted to phase 2 by elongating top hole in strut to hub but unfortunately if memory serves me right there isn't enough metal on the phase 2 struts to do this. There is the option of using the phase two strut top of course on your phase 1 and that would allow straight fitment. There was available at some time a set of camber corrector brackets, that bolted between the top hub hole and strut hole but have no idea how good they were. Hope this helps

[Matt@CodeRedMotorsports]

I have some koni suspension, i believe it came of a ph2 car, can this be made to fit a ph1? If so whats involved?

Could always try some of my camber bolts Pen? Matt.

[Bigfoot]

Easiest option would be to go phase 2 setup, there is a set on eBay at the moment

[Penfold aka The Dealer]

Easiest option would be to go phase 2 setup, there is a set on eBay at the moment

I was thinking about swapping everything over from the ghost.... such as top mounts etc...

[Brigsy]

The hubs are the same, all you need to do is use the ph2 strut & top mounts.