omex limiter problem..

[kial]

right.. started to wire it all up..

blue wire - negative on the coil ( unsure what one this is so i have snap connected it to an earth from a connector coming into the coil)

red wire - snap connected to the white wire which shows me power going into the coil on the turn of the key

black - earthed to steering collum

orange - orange ( on launch button )

black - snap connected to other black earthing to steering collum..


basically the unit has power allowing me to set limit ect.. but when i go to test it its not actually doing anything?

i have the turbo timer switched off so thats not the cause of it.

im thinking somethings wrong with the red wire? not allowing it to cut the ignition?

any one have any clue or ideas?

thanks kial :)

[Adey aka Ewok]

my first port of call would be the omex website, then click the relevant link in here http://omextechnology.com/page11.html (http://omextechnology.com/page11.html)

and the wire you have put to earth (blue one) needs to go to coil negative, its in the wrong place and thats why it doesnt work :agree:

[Sparkie]

the red and the blue have to goto the coil.

unscrew the two torx bolts that attach the coil to the front of the ignition unit.

push the wires through the two slots in the ignition unit body and wrap them around the two springy metal clips, that slip over the two pegs on the ignition coil, when its in position.
that should do it.

[kial]

right thats me sorted. thanks for your help guys !!

ps sparkie wrapped em round the nipples and pushed it down onto the clips ;-) spot on thanks