Sparkie
04-11-2008, 23:15
mine worked fine for a bit, sorted out my old mk1 TL a treat....
then i fitted it to my turbo 2.
i used a seperate battery, but made a slight boo boo by leavin the LC1 on without the car on for a good few hours.- so the seperate battery went flat. error code 9 ??
changed the battery, and it was all good. took the car for a drive and at WOT i think the sensor got too hot, cos the reading got 'stuck' and then started reading 22.4.
so i tried another sensor, it last one run. :(
ive recalibrated the lc1 and sensors etc etc several times.
now it appears to be stuck in a weird cycle. - i attach it to a battery and it starts flashing error code 2 immediately.- no matter what i do!
tried to reflash it, but didnt have communication with the unit- even though LM programmer detected it was there.
is it fooked, and will i need to buy a different manufacturers unit?
then i fitted it to my turbo 2.
i used a seperate battery, but made a slight boo boo by leavin the LC1 on without the car on for a good few hours.- so the seperate battery went flat. error code 9 ??
changed the battery, and it was all good. took the car for a drive and at WOT i think the sensor got too hot, cos the reading got 'stuck' and then started reading 22.4.
so i tried another sensor, it last one run. :(
ive recalibrated the lc1 and sensors etc etc several times.
now it appears to be stuck in a weird cycle. - i attach it to a battery and it starts flashing error code 2 immediately.- no matter what i do!
tried to reflash it, but didnt have communication with the unit- even though LM programmer detected it was there.
is it fooked, and will i need to buy a different manufacturers unit?