Heavy duty engine mounts

[Danboi2]

Im gonna be doing a mini rebuilt soon and was woundering what people thought of these and wheres the best place to get them from?

[Bigfoot]

Heavy duty mounts? Which ones are we talking about, the ones which companies class as uprated? these are just pearl engine mounts but not available anymore so might be lucky finding a company still with stock. Got a firstline engine mount in for somebody and that seemed fine but obviously untested properly. Scoff done a rear mount which was made from a landrover engine mount I believe, and also there is a company which does real uprated ones but they were in the excess of 150-200 I seem to think.

[Danboi2]

yea like these

http://www.cgbmotorsport.net/engine-mounts-heavy-duty-189-p.asp

[Bigfoot]

They aren't heavy duty, its a bit like group N clutch or whatever they want to call them, the engine mounts are more than likely pearl ones which he has left over.

http://www.rtoc.org/boards/showthread.php?t=4728

[Bigfoot]

These are the only ones which have been found which are the uprated ones which can buy online for a set

http://www.spoox.co.uk/catalog/index.php?cPath=25_245&osCsid=dd1fbe18574e9b87093e15951e46dd0e

[philg]

I looked everywhere for pearl with no luck, ended up buying firstline to :).

[dangerous dave]

These are the only ones which have been found which are the uprated ones which can buy online for a set

http://www.spoox.co.uk/catalog/index.php?cPath=25_245&osCsid=dd1fbe18574e9b87093e15951e46dd0e


if they were more like £150 i would think about them..:)

[Danboi2]

I've tried most of the afternoon get hold of some pearl ones, my local auto place got the offside one in stock but the other two he said they can't get hold of

[Tony Walker]

I had probs with my engine moving alot with standard mounts, (clutch arm was bashing my double cap intercooler) so i got the engine steady on the front of the gearbox and squashed a wishbone bush over it, fits perfectly into the subframe and my engine barely moves now.:agree: