reco
13-03-2011, 22:35
i fitted another turbo to the clio today as the standard t2 was id say more whining than anything else but no smoke :)
after fitting ,priming with oil ect..
took it for a run i had the bleed valve from last turbo which i had not touched was fine till i got to 3/4 of the way up the standard boost gauge in the 5 clocks then started chirping(its the only way i can explain it)
bass j just happened to be on the phone to marky mark and he said it could be to much boost
(bass FAILS at being a good sectary )
so turned down the boost using the bleed valve just at same mark chirping
pulled off the bleed valve and ran pipe strait to actuator from carb its still having the same problem but lower boost and also with foot planted on the floor
part throttle seams to be ok no chirping
bass j knows all the stuff about the turbo also as it was his
i know its bigger than a standard t2 but not by much
open to ideas ??
after fitting ,priming with oil ect..
took it for a run i had the bleed valve from last turbo which i had not touched was fine till i got to 3/4 of the way up the standard boost gauge in the 5 clocks then started chirping(its the only way i can explain it)
bass j just happened to be on the phone to marky mark and he said it could be to much boost
(bass FAILS at being a good sectary )
so turned down the boost using the bleed valve just at same mark chirping
pulled off the bleed valve and ran pipe strait to actuator from carb its still having the same problem but lower boost and also with foot planted on the floor
part throttle seams to be ok no chirping
bass j knows all the stuff about the turbo also as it was his
i know its bigger than a standard t2 but not by much
open to ideas ??