View Full Version : Problem????
Ok so i tried crankin my engine the other week to test it an it was making a really bad noisr like something grinding/ catching ( dont know what to say to explain it) but i thort id get a new starter.. Just fitted it and its stil doing the same.. And im 100% tht its sitting right :confused: help anyone? Not feeling to strip it all out again :crap:
You probably havent got the locating dowel fitted, the starter wont be positioned correctly because of this and not engaging properly ;)
TrixNFlix
09-03-2011, 18:33
Is the dowel fitted for the starter motor to locate into?
Is the gearbox earth strap on?
Is the battery fully charged?
Does the dowel sit in the starter or gearbox? Not sure if iv got one and batterys ok.. Havnt got gearbox earth either.. Could these be te problems.. Hopefully is!
SCHWARTZ
09-03-2011, 19:35
if it is the starter grinding (look at ring gear teeth if they are shiny on the top most prob is) even if the dowel is in the right place it still sometimes grinds. make sure dowel is in right place (it will engage in starter and gearbox) then do the starter bolts up slightly and give it a little tap away from the flywheel do the bolts up and see if its sorted.
does anyone have a piccy of the dowell, as im going to be changing my starter the weekend and want to make sure i get it right first.
Mat
Nice one schwartz:agree: il have a look the weekend.. And a pic would be nice aswel if anyone as one???
http://i252.photobucket.com/albums/hh25/GTTJames/Startermotordowellocation.jpg
thats the location dowel is a hollow tubular thingy :)
will look a bit like this
http://product-images.qedmotorsport.co.uk/rover/k-series/crankshafts/crankshaft-to-flywheel-dowel.jpg
modfather
10-03-2011, 11:06
if any1 needs a dowel heres a couple part numbers i found not sure which one is which apparently theres 2 types 77 05 010 087 or 77 05 010 006, i did find some on parts reunited hers a link
http://www.partsreunited.co.uk/category/217/Renault/listings/677627/7705010087.html
nice one for that :agree::agree:
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.